Drill bush DIN 179 form A, bore 10.4 mm, length 12 mm, outside dia 18 mm, hardened steel

The short version of this DIN 179 bush guides drills of 10.4 mm over an overall length of 12 mm. In form A the bore is rounded on one side, which makes work in the jig easier.

Benefits

• Guide bore of 10.4 mm to DIN 179 for the matching tool
• Outside diameter of 18 mm as a ground seat in the drill plate
• Bore rounded on one side to form A, with a fixed fitting direction in the jig
• Special case-hardening steel, hardened to 740 ± 80 HV 10 and ground

Applications

• Hole patterns in assembly jigs and equipment frames
• Workshop production with changing workpieces
• Redrilling and opening up holes on existing jigs
• Pattern making and mould making

Standard and material

The bush is made to DIN 179 in form A, and the bore is rounded on one side. The material is special case-hardening steel, hardened to 740 ± 80 HV 10 and ground.