Everis BLQ6 blind-mate non-spill coupling body, G1/2 male thread, anodized aluminum, EPDM - CPC BLQ6D31008

BLQ6D31008 is the body half of an Everis BLQ6 connection and threads into the line with a G1/2 male port. Its valve closes tightly enough on disconnect that CPC specifies just 0.03 cc of loss per cycle, both unpressurized and at 120 psi.

Use in the data center

The BLQ6 series is built for blind-mate connections. The coupling engages as a server tray carrying direct-to-chip cold plates slides into the rack, with the mating half mounted on the rack manifold, and it absorbs up to 1 mm of axial misalignment. Because it can be disconnected under pressure with almost no coolant escaping, a tray can be pulled and replaced while the system keeps running, without draining the loop. CPC offers an optional kit for panel mounting.

Benefits

• Non-spill disconnect: 0.03 cc per disconnect keeps coolant away from boards and electronics.
• Disconnect under pressure: permitted across the full range from vacuum to 8.3 bar.
• Forgiving engagement: axial engagement tolerance maintains full flow even when the halves are not fully seated.
• Redundant seals: add protection against dirt and debris while the coupling is connected.
• Built for long service: a friction-free valve and anodized aluminum housing handle long-term connection and repeated cycling.

Packing unit

Packing unit: 10 pcs. Price per piece, ordered in steps of 10 pcs.

Datasheet

The Everis BLQ6 series datasheet is available under Downloads.