Straight female stud coupling, G 1/4", tube 8 S, stainless steel 1.4571, no nut or ring

Once installed, the female stud coupling connects a precision tube through a cutting ring to a parallel G female thread. Material stainless steel 1.4571 is listed for this version. The data state a working pressure of 630 bar. Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• Female thread G 1/4", so the tube screws onto an existing male thread without drilling the device.
• Tube connection 8 S (M16x1,5) in the heavy series.
• Working pressure up to 630 bar in the straight through form.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube and holds it by both form and friction.

Applications

When rebuilding a line of the heavy series the male thread on the device stays as it is and only the coupling is changed.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.