Straight female stud coupling, G 1/4", tube 10 L, stainless steel 1.4571, no nut or ring

The female stud coupling connects a precision tube through a cutting ring to a parallel G female thread. The article is listed with a working pressure of 315 bar. The stated figures are female thread G 1/4" and tube connection 10 L (M16x1.5). This version is supplied with light series and scope of delivery without nut and cutting ring.

Benefits

• Female thread G 1/4", so the tube screws onto an existing male thread without drilling the device.
• Tube connection 10 L (M16x1,5) in the light series.
• Working pressure up to 315 bar in the straight through form.
• Temperature range -60 to +400 °C for the version in stainless steel 1.4571.
• When tightened the cutting ring bites into the tube and holds it by both form and friction.

Applications

In hydraulics the version in stainless steel 1.4571 connects the tube to a gauge port or test point and holds 315 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.