Straight female stud coupling, G 1/2", tube 14 S, zinc-plated steel

This female stud coupling connects a precision tube through a cutting ring to a parallel G female thread. The article is listed with a working pressure of 630 bar. This version is listed with female thread G 1/2" and tube connection 14 S (M22x1.5). The stated material is zinc-plated steel. This version is supplied with heavy series.

Benefits

• Female thread G 1/2", so the tube screws onto an existing male thread without drilling the device.
• Tube connection 14 S (M22x1,5) in the heavy series.
• Working pressure up to 630 bar in the straight through form.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.
• When tightened the cutting ring bites into the tube and holds it by both form and friction.

Applications

In hydraulics the version in zinc-plated steel connects the tube to a gauge port or test point and holds 630 bar.

Standards and conformity

The coupling belongs to the cutting ring system for precision tubes. The tube is cut off square, deburred inside and out and cleaned, and no tube cutter is used.