Straight female stud coupling, G 1-1/2", tube 38 S, zinc-plated steel, no nut or ring

As a female stud coupling the article connects a precision tube through a cutting ring to a parallel G female thread. The data state a working pressure of 315 bar. This version is listed with female thread G 1-1/2" and tube connection 38 S (M52x2). Material zinc-plated steel is listed for this version. Also stated are heavy series and scope of delivery without nut and cutting ring.

Benefits

• Female thread G 1-1/2", so the tube screws onto an existing male thread without drilling the device.
• Tube connection 38 S (M52x2) in the heavy series.
• Working pressure up to 315 bar in the straight through form.
• Temperature range -40 to +120 °C for the version in zinc-plated steel.
• When tightened the cutting ring bites into the tube and holds it by both form and friction.

Applications

When rebuilding a line of the heavy series the male thread on the device stays as it is and only the coupling is changed.

Standards and conformity

Before assembly the stud thread and cone, the inside of the union nut and the cutting ring are oiled. Thin-walled or soft tubes need a reinforcing sleeve.