Pressure switch, G 1/4", 20 - 100 bar, zinc plated steel, overpressure safety 600 bar

Where a control system has to react to pressure, this pressure switch supplies the matching contact. The setting range extends over 20 - 100 bar. The body is made of zinc plated steel. The device is screwed in with G 1/4". The overpressure safety amounts to 600 bar.

Benefits

• Temperature range -20 to +70 °C for use in the workshop and in the plant
• Degree of protection IP 65 against dust and moisture at the installation point
• Switching capacity 250 V / 2 A at the output contact
• Setting range 20 - 100 bar as the leading rating of the device
• Connection thread G 1/4" for direct installation in the line
• Overpressure safety 600 bar, so the load limit is clearly stated

Applications

Compressor controls, pump monitoring, hydraulic power units and limit signalling in machines.

Standards and conformity

The data sheets refer to ATEX Ex II 2G Ex d IIC T6 / T5 X. Further approvals are not documented and are therefore not stated.