Anti-static hose (PU), black - Riegler K230

Anti-static hose (PU), black. This range covers 4 variants from 1.16 EUR. Select the version you need above.

Available variants

Shared technical data

About Electrically conductive hoses

Anti-static polyurethane hose drains electrostatic charge instead of letting it build up on the hose surface. That is required wherever a discharge would upset electronics or create an ignition risk. The four sizes run from 4x2.4 to 12x8 mm and are rated up to 7.24 bar at 26 °C.

What matters when choosing

• Hose O.D. and I.D.: 4x2.4, 6x4, 8x5 and 12x8 mm. The size follows from the flow rate needed and from the push-in connectors already in use.
• Working pressure at 25 °C and at 65 °C: both figures are given for every size, for 4x2.4 that is 7.24 bar against 3.45 bar. In warm surroundings the second figure is the limit.
• Surface resistance and specific volume resistance: these two values describe the dissipative behaviour. They are the figures to check against the earthing or hazardous area concept of the plant.
• Temperature range: -40 °C to 70 °C across the whole series, which also covers cold installation sites.
• Reel length and min. bend radius: supplied on 25 m reels. The minimum bend radius decides how tightly the line can be routed on robots and in drag chains.

Typical applications

• Electrical installations and control cabinet areas where charge build-up has to be avoided
• Robotics and handling equipment with moving air lines
• Cleanrooms in semiconductor production
• Packaging machines running film and paper at high throughput
• Powder coating equipment and medical devices

The hose material is ether based polyurethane, set to be electrically conductive and therefore dissipative. All four sizes in the group are made in the USA.