Images are examples, some edited with AI. The technical data are authoritative. AI notice
Dispensing head from 3 µl VTOE-D8-T3-M22C-08-V-S-PC-S - Festo 8063370
The dispensing head VTOE-D8-T3-M22C-08-V-S-PC-S from Festo dispenses liquid media in the microlitre range via a directly actuated valve. The data sheet lists minimum dosing volume 3 µl and typical dosing precision below 1% CV for volumes above 5 µl, below 2.5% CV for volumes between 1-5 µl.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The dispensing head VTOE-D8-T3-M22C-08-V-S-PC-S dispenses liquid media in the microlitre range via a directly actuated valve. The data sheet lists minimum dosing volume 3 µl, typical dosing precision below 1% CV for volumes above 5 µl, below 2.5% CV for volumes between 1-5 µl and dosing needle with nominal width 0.60 mm.
Benefits
- Minimum dosing volume 3 µl
- Typical dosing precision below 1% CV for volumes above 5 µl, below 2.5% CV for volumes between 1-5 µl
- Dosing needle with nominal width 0.60 mm
- Switching times 7 ms on and 2 ms off
- Maximum switching frequency 4 Hz
- Operating pressure 0 to 0.5 bar
Fields of application
Fields of use for VTOE-D8-T3-M22C-08-V-S-PC-S are analysis and laboratory devices that dispense small quantities precisely. Typical tasks for VTOE-D8-T3-M22C-08-V-S-PC-S are automated dosing processes that require reproducible volumes in the microlitre range.
Technical data
| Order code | VTOE-D8-T3-M22C-08-V-S-PC-S |
|---|---|
| Festo part number | 8063370 |
| Valve function | 2/2-way, single solenoid, closed |
| Operating pressure | 0 to 0.5 bar |
| Internal volume | 113 µl valve with fluidic connections |
| Nominal size | 0.8 mm |
| Nominal width of dosing needle | 0.60 mm |
| Length of dosing needle | 30 mm |
| Grid dimension | 9 mm |
| Sealing principle | Soft |
| Mounting position | Any |
| Type of reset | Mechanical spring |
| Type of piloting | Direct |
| Water flow rate at maximum operating pressure | 1300 µl/s |
| Minimum dosing volume | 3 µl |
| Note on dosing volume | Depends on configuration, environment and application |
| Typical dosing precision | below 1% CV for volumes above 5 µl, below 2.5% CV for volumes between 1-5 µl |
| Note on dosing precision | Depends on configuration, environment and application |
| Maximum switching frequency | 4 Hz |
| Note on switching frequency | Dependent on the ambient temperature and installation state |
| Switching time on | 7 ms |
| Note on switching time on | Depends on configuration, environment and application |
| Switching time off | 2 ms |
| Note on switching time off | Depends on configuration, environment and application |
| Duty cycle | 100 % |
| Electrical power consumption | 1.8 W |
| Nominal operating voltage DC | 24 V |
| Permissible voltage fluctuations | ±10% |
| Medium | Liquid media |
| Note on the medium | Observe the resistance of the materials in contact with the medium |
| Vibration resistance | Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - No corrosion stress |
| Storage temperature | -20 to 70 °C |
| Media temperature | 5 to 50 °C |
| Degree of protection | IP30 |
| Note on degree of protection | In mounted state |
| Ambient temperature | 5 to 40 °C |
| Product weight | 18 g |
| Electrical connection | 2-wire, Cable, Open end |
| Cable length | 0.15 m |
| Wire ends | Stripped |
| Nominal cross section conductor | AWG28 |
| Type of mounting | With female thread and centring sleeve |
| Fluid connection | UNF1/4-28 |
| Note on fluid connection | Fitting enclosed for tubing with 3 mm outside diameter |
| Material of dosing needle | High-alloy stainless steel |
| Material number of dosing needle | 1.4301 |
| Note on materials | LABS containing materials included, RoHS compliant |
| Materials in contact with the medium | ETFE, Fluoro rubber, PC, PEEK, PPS, High-alloy stainless steel |
| Type of actuation | Electrical |
| Nominal altitude of use | ≤ 2000 m NHN |
| Relative air humidity | 0 - 95 %, Not condensing |
| Pollution degree | 2 |
| Weight | 0.07 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VTOE-D8-T3-M22C-08-V-S-PC-S |
| EAN | 4052568296674 |
| Zolltarifnummer | 84799070 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Nominal size DN [mm] | 0,8 |
| Function | 2/2 closed monostable |
| Actuation type | Electrical |
| Operating conditions | EN 60068-2-27, EN 60068-2-6 |
| Operating voltage | 24 V DC |
| Series | VTOE |
| Betriebsdruck max [bar] | 0.5 |
| Protection rating | IP30 |
| Temperature (max.) | 40 |
Downloads
Accessories
Dispensing head from 1 µl VTOE-D7-T3-M22C-08-V-S-PC-S - Festo 8063369
Item FES-8063369Dispensing head from 5 µl VTOE-D9-T3-M22C-08-V-S-PC-S - Festo 8063371
Item FES-8063371Dispensing head from 1 µl VTOE-8-D7-T3-M22C-08-V-S-PC-M - Festo 8063634
Item FES-8063634Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.

