Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 26 mm, 110 V AC VSVA-B-T32U-AZH-A1-2AC1 - Festo 547190
900 l/min standard nominal flow at 2 to 10 bar: solenoid valve 2x 3/2 open, monostable for mounting on sub-bases to ISO 15407-1 (26 mm). The 110 V AC coil (2.9 VA pick-up and 2.1 VA holding power) connects via an individual plug with form C pin pattern to EN 175301-803.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve VSVA-B-T32U-AZH-A1-2AC1 provides two independent 3/2-way valves, both normally open. Standard nominal flow is 900 l/min at a size of 26 mm to ISO 15407-1.
Benefits
- Standardised: ISO 15407-1 in size 26 mm, the valve fits any sub-base of this standard and size.
- Operating pressure 2 to 10 bar: designed for common line pressures, pilot pressure 3 to 10 bar.
- Switching times: on 20 ms, off 28 ms.
- Solenoid coil: 110 V AC at 2.9 VA pick-up and 2.1 VA holding power, duty cycle 100 %. Voltage may fluctuate by -15 % / +10 %.
- Built for the shop floor: degree of protection IP65 and NEMA 4, ambient temperature -5 to 50 °C.
- Flow rate: 1250 l/min at the valve, 1000 l/min on a single sub-base and 900 l/min pneumatically linked.
Application
Pilot air is supplied externally, at 3 to 10 bar pilot pressure. Manual override non-detenting. Exhaust can be throttled. Mounted on a sub-base, any mounting position. Medium compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.
Technical data
| Type | VSVA-B-T32U-AZH-A1-2AC1 |
|---|---|
| Festo part number | 547190 |
| Valve function | 2x 3/2 open, monostable |
| Actuation type | electrical |
| Valve size | 26 mm |
| Standard nominal flow rate | 900 l/min |
| Operating pressure | 2 to 10 bar |
| Design | piston spool |
| Reset method | pneumatic spring |
| Degree of protection | IP65, NEMA 4 |
| Nominal size | 9 mm |
| Exhaust function | can be throttled |
| Sealing principle | soft |
| Mounting position | any |
| Conforms to standard | ISO 15407-1, VDMA 24563 |
| Manual override | non-detenting |
| Pilot control | piloted |
| Pilot air supply | external |
| Flow direction | non-reversible |
| Overlap | positive overlap |
| Signal status display | LED |
| Flow rate valve | 1250 l/min |
| Flow rate valve on single sub-base | 1000 l/min |
| Flow rate valve, pneumatically linked | 900 l/min |
| Switching time off | 28 ms |
| Switching time on | 20 ms |
| Duty cycle | 100 % |
| Coil characteristics | 110 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Medium temperature | -5 to 50 °C |
| Relative humidity | 0 - 90 % |
| Noise level | 85 dB(A) |
| Pilot medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 to 50 °C |
| Maximum tightening torque, valve mounting | 2 Nm |
| Product weight | 305 g |
| Electrical connection | pin pattern form C to EN 175301-803, with protective earth |
| Mounting type | on sub-base |
| Auxiliary pilot air ports 12, 14 | sub-base size 26 mm to ISO 15407-1 |
| Pilot exhaust port 82/84 | non-ducted, optionally ducted |
| Pneumatic connection 1, 2, 3, 4, 5 | sub-base size 26 mm to ISO 15407-1 |
| Pilot interface | to ISO 15218 |
| Note on materials | RoHS compliant |
| Seal material | NBR |
| Housing material | die-cast aluminium |
| Screw material | galvanised steel |
| Pilot pressure | 3 to 10 bar |
| CE marking (see declaration of conformity) | to EU Low Voltage Directive |
| Weight | 0.32 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VSVA-B-T32U-AZH-A1-2AC1 |
| EAN | 4052568187064 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Nominal size DN [mm] | 9 |
| Medium | Compressed air |
| Function | 2x3/2 open monostable |
| Flow rate [l/min] | 900 |
| Medientemperatur [°C] | -5 bis 50 |
| Norm | DIN EN 175301-803, DIN ISO 15407-1, ISO 15218, VDMA 24563 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 110 V AC |
| Series | VSVA |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 26 mm, 12 V DC VSVA-B-T32U-AZH-A1-5C1 - Festo 547150
Item FES-547150Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 26 mm, 24 V AC VSVA-B-T32U-AZH-A1-1AC1 - Festo 547110
Item FES-547110Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 26 mm, 24 V DC VSVA-B-T32U-AZH-A1-1C1 - Festo 547070
Item FES-547070Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 18 mm, 110 V AC VSVA-B-T32U-AZH-A2-2AC1 - Festo 547191
Item FES-547191Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 18 mm, 12 V DC VSVA-B-T32U-AZH-A2-5C1 - Festo 547151
Item FES-547151Alternatives
Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 26 mm, 24 V DC VSVA-B-P53U-ZH-A1-1C1 - Festo 547082
Item FES-547082Solenoid valve 5/2 bistable, ISO 15407-1 26 mm, 24 V DC VSVA-B-B52-ZH-A1-1C1 - Festo 547074
Item FES-547074Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.



