Images are examples, some edited with AI. The technical data are authoritative. AI notice

Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 18 mm, 230 V AC VSVA-B-T32U-AH-A2-3AC1 - Festo 547211

Festo ✓ Original product Brand new

400 l/min standard nominal flow at 2 to 10 bar: solenoid valve 2x 3/2 open, monostable for mounting on sub-bases to ISO 15407-1 (18 mm). The 230 V AC coil (2.9 VA pick-up and 2.1 VA holding power) connects via an individual plug with form C pin pattern to EN 175301-803.

Net
€140.12
excl. VAT
Item FES-547211
Manufacturer no. VSVA-B-T32U-AH-A2-3AC1
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The solenoid valve VSVA-B-T32U-AH-A2-3AC1 provides two independent 3/2-way valves, both normally open. In size 18 mm to ISO 15407-1 it reaches 400 l/min standard nominal flow.

Benefits

  • ISO 15407-1: size 18 mm allows replacement by standard valves of the same size without re-piping.
  • Short switching times: 13 ms on, 21 ms off.
  • Solenoid coil: 230 V AC at 2.9 VA pick-up and 2.1 VA holding power, duty cycle 100 %. Voltage may fluctuate by -15 % / +10 %.
  • Built for the shop floor: degree of protection IP65 and NEMA 4, ambient temperature -5 to 50 °C.
  • High flow: 600 l/min at the valve, 450 l/min on a single sub-base and 400 l/min pneumatically linked.
  • Working range: 2 to 10 bar operating pressure.

Application

Internal pilot air from port 1, no separate pilot line needed. Manual override non-detenting. The exhaust air can be throttled. Mounts on a sub-base in any position. Operates with compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.

Technical data

TypeVSVA-B-T32U-AH-A2-3AC1
Festo part number547211
Valve function2x 3/2 open, monostable
Actuation typeelectrical
Valve size18 mm
Standard nominal flow rate400 l/min
Operating pressure2 to 10 bar
Designpiston spool
Reset methodpneumatic spring
Degree of protectionIP65, NEMA 4
Nominal size5 mm
Exhaust functioncan be throttled
Sealing principlesoft
Mounting positionany
Conforms to standardISO 15407-1, VDMA 24563
Manual overridenon-detenting
Pilot controlpiloted
Pilot air supplyinternal
Flow directionnon-reversible
Overlappositive overlap
Signal status displayLED
Flow rate valve600 l/min
Flow rate valve on single sub-base450 l/min
Flow rate valve, pneumatically linked400 l/min
Switching time off21 ms
Switching time on13 ms
Duty cycle100 %
Coil characteristics230 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA
Permissible voltage fluctuations-15 % / +10 %
Operating mediumcompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumlubricated operation possible (then required for further operation)
Vibration resistancetransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceshock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC0 - no corrosion stress
Medium temperature-5 to 50 °C
Relative humidity0 - 90 %
Noise level85 dB(A)
Pilot mediumcompressed air to ISO 8573-1:2010 [7:4:4]
Ambient temperature-5 to 50 °C
Maximum tightening torque, valve mounting1 Nm
Product weight174 g
Electrical connectionpin pattern form C to EN 175301-803, with protective earth
Mounting typeon sub-base
Auxiliary pilot air ports 12, 14sub-base size 18 mm to ISO 15407-1
Pilot exhaust port 82/84ducted or non-ducted to standard
Pneumatic connection 1, 2, 3, 4, 5sub-base size 18 mm to ISO 15407-1
Pilot interfaceto ISO 15218
Note on materialsRoHS compliant
Seal materialHNBR, NBR
Housing materialdie-cast aluminium
Screw materialgalvanised steel
CE marking (see declaration of conformity)to EU Low Voltage Directive
Weight0.185 kg
ManufacturerFesto
Hersteller-NrVSVA-B-T32U-AH-A2-3AC1
EAN4052568187279
Zolltarifnummer84812090
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
Nominal size DN [mm]5
MediumCompressed air
Function2x3/2 open monostable
Flow rate [l/min]400
Medientemperatur [°C]-5 bis 50
NormDIN EN 175301-803, DIN ISO 15407-1, ISO 15218, VDMA 24563
Operating conditionsEN 60068-2-27, EN 60068-2-6, ISO 8573-1
Operating voltage230 V AC
SeriesVSVA
Betriebsdruck max [bar]10
Protection ratingIP65
Temperature (max.)50

Downloads

Accessories

Alternatives

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.