Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 2x 3/2 closed, monostable, ISO 15407-1 18 mm, 230 V AC VSVA-B-T32C-AH-A2-3AC1 - Festo 547209
Solenoid valve 2x 3/2 closed, monostable for sub-bases to ISO 15407-1 (18 mm): 400 l/min standard nominal flow at 2 to 10 bar operating pressure. Electrical connection of the 230 V AC coil (2.9 VA pick-up and 2.1 VA holding power) is via form C pin pattern to EN 175301-803.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve VSVA-B-T32C-AH-A2-3AC1 replaces two separate normally closed 3/2-way valves. Standard nominal flow is 400 l/min at a size of 18 mm to ISO 15407-1.
Benefits
- Standardised: ISO 15407-1 in size 18 mm, the valve fits any sub-base of this standard and size.
- For continuous duty: 230 V AC coil with 2.9 VA pick-up and 2.1 VA holding power and 100 % duty cycle. Voltage tolerance -15 % / +10 %.
- Sealed design: degree of protection IP65 and NEMA 4, noise level 85 dB(A).
- Flow rate: 600 l/min at the valve, 450 l/min on a single sub-base and 400 l/min pneumatically linked.
- Wide pressure range: 2 to 10 bar.
- Switching times: on 13 ms, off 21 ms.
Application
Internal pilot air from port 1, no separate pilot line needed. Manual override non-detenting. For speed adjustment the exhaust can be throttled. Mounts on a sub-base in any position. Operates with compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.
Technical data
| Type | VSVA-B-T32C-AH-A2-3AC1 |
|---|---|
| Festo part number | 547209 |
| Valve function | 2x 3/2 closed, monostable |
| Actuation type | electrical |
| Valve size | 18 mm |
| Standard nominal flow rate | 400 l/min |
| Operating pressure | 2 to 10 bar |
| Design | piston spool |
| Reset method | pneumatic spring |
| Degree of protection | IP65, NEMA 4 |
| Nominal size | 5 mm |
| Exhaust function | can be throttled |
| Sealing principle | soft |
| Mounting position | any |
| Conforms to standard | ISO 15407-1, VDMA 24563 |
| Manual override | non-detenting |
| Pilot control | piloted |
| Pilot air supply | internal |
| Flow direction | non-reversible |
| Overlap | positive overlap |
| Signal status display | LED |
| Flow rate valve | 600 l/min |
| Flow rate valve on single sub-base | 450 l/min |
| Flow rate valve, pneumatically linked | 400 l/min |
| Switching time off | 21 ms |
| Switching time on | 13 ms |
| Duty cycle | 100 % |
| Coil characteristics | 230 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Medium temperature | -5 to 50 °C |
| Relative humidity | 0 - 90 % |
| Noise level | 85 dB(A) |
| Pilot medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 to 50 °C |
| Maximum tightening torque, valve mounting | 1 Nm |
| Product weight | 174 g |
| Electrical connection | pin pattern form C to EN 175301-803, with protective earth |
| Mounting type | on sub-base |
| Auxiliary pilot air ports 12, 14 | sub-base size 18 mm to ISO 15407-1 |
| Pilot exhaust port 82/84 | ducted or non-ducted to standard |
| Pneumatic connection 1, 2, 3, 4, 5 | sub-base size 18 mm to ISO 15407-1 |
| Pilot interface | to ISO 15218 |
| Note on materials | RoHS compliant |
| Seal material | HNBR, NBR |
| Housing material | die-cast aluminium |
| Screw material | galvanised steel |
| CE marking (see declaration of conformity) | to EU Low Voltage Directive |
| Weight | 0.18 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VSVA-B-T32C-AH-A2-3AC1 |
| EAN | 4052568187255 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Nominal size DN [mm] | 5 |
| Medium | Compressed air |
| Function | 2x3/2 closed monostable |
| Flow rate [l/min] | 400 |
| Medientemperatur [°C] | -5 bis 50 |
| Norm | DIN EN 175301-803, DIN ISO 15407-1, ISO 15218, VDMA 24563 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 230 V AC |
| Series | VSVA |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 2x 3/2 closed, monostable, ISO 15407-1 18 mm, 12 V DC VSVA-B-T32C-AH-A2-5C1 - Festo 547129
Item FES-547129Solenoid valve 2x 3/2 closed, monostable, ISO 15407-1 18 mm, 24 V AC VSVA-B-T32C-AH-A2-1AC1 - Festo 547089
Item FES-547089Solenoid valve 2x 3/2 closed, monostable, ISO 15407-1 18 mm, 24 V DC VSVA-B-T32C-AH-A2-1C1 - Festo 546693
Item FES-546693Solenoid valve 2x 3/2 closed, monostable, ISO 15407-1 26 mm, 230 V AC VSVA-B-T32C-AH-A1-3AC1 - Festo 547208
Item FES-547208Solenoid valve 2x 3/2 closed, monostable, ISO 15407-1 26 mm, 110 V AC VSVA-B-T32C-AH-A1-2AC1 - Festo 547168
Item FES-547168Alternatives
Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 18 mm, 24 V DC VSVA-B-P53U-ZH-A2-1C1 - Festo 547083
Item FES-547083Solenoid valve 5/2 bistable, ISO 15407-1 18 mm, 24 V DC VSVA-B-B52-ZH-A2-1C1 - Festo 547075
Item FES-547075Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 26 mm, 24 V DC VSVA-B-T32U-AZH-A1-1C1 - Festo 547070
Item FES-547070Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 26 mm, 24 V DC VSVA-B-P53U-ZH-A1-1C1 - Festo 547082
Item FES-547082Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.



