Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 18 mm, 24 V AC VSVA-B-P53U-ZH-A2-1AC1 - Festo 547123
450 l/min standard nominal flow at -0.9 to 10 bar: solenoid valve 5/3 mid-position pressurised for mounting on sub-bases to ISO 15407-1 (18 mm). The 24 V AC coil (3.1 VA pick-up and 2.3 VA holding power) connects via an individual plug with form C pin pattern to EN 175301-803.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve VSVA-B-P53U-ZH-A2-1AC1 supplies both working lines with compressed air in mid-position. In size 18 mm to ISO 15407-1 it reaches 450 l/min standard nominal flow.
Benefits
- Standardised: ISO 15407-1 in size 18 mm, the valve fits any sub-base of this standard and size.
- Performance: flow rate 650 l/min at the valve, 500 l/min on a single sub-base and 450 l/min pneumatically linked.
- Wide pressure range: -0.9 to 10 bar, vacuum included, pilot pressure 3 to 10 bar.
- Short switching times: 18 ms on, 30 ms off, 20 ms changeover.
- Electrics: 24 V AC, 3.1 VA pick-up and 2.3 VA holding power, 100 % duty cycle, tolerance -15 % / +10 %.
- Built for the shop floor: degree of protection IP65 and NEMA 4, ambient temperature -5 to 50 °C.
Application
External pilot air (3 to 10 bar) decouples the pilot stage from the working pressure. Manual override non-detenting. The exhaust air can be throttled. Mounts on a sub-base in any position. Operates with compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.
Technical data
| Type | VSVA-B-P53U-ZH-A2-1AC1 |
|---|---|
| Festo part number | 547123 |
| Valve function | 5/3 mid-position pressurised |
| Actuation type | electrical |
| Valve size | 18 mm |
| Standard nominal flow rate | 450 l/min |
| Operating pressure | -0.9 to 10 bar |
| Design | piston spool |
| Reset method | mechanical spring |
| Degree of protection | IP65, NEMA 4 |
| Nominal size | 5 mm |
| Exhaust function | can be throttled |
| Sealing principle | soft |
| Mounting position | any |
| Conforms to standard | ISO 15407-1, VDMA 24563 |
| Manual override | non-detenting |
| Pilot control | piloted |
| Pilot air supply | external |
| Flow direction | reversible |
| Overlap | positive overlap |
| Signal status display | LED |
| Flow rate valve | 650 l/min |
| Flow rate valve on single sub-base | 500 l/min |
| Flow rate valve, pneumatically linked | 450 l/min |
| Switching time off | 30 ms |
| Switching time on | 18 ms |
| Duty cycle | 100 % |
| Coil characteristics | 24 V AC: 50/60 Hz, pick-up power 3.1 VA, holding power 2.3 VA |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Medium temperature | -5 to 50 °C |
| Relative humidity | 0 - 90 % |
| Noise level | 85 dB(A) |
| Pilot medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 to 50 °C |
| Maximum tightening torque, valve mounting | 1 Nm |
| Product weight | 174 g |
| Electrical connection | pin pattern form C to EN 175301-803, without protective earth |
| Mounting type | on sub-base |
| Auxiliary pilot air ports 12, 14 | sub-base size 18 mm to ISO 15407-1 |
| Pilot exhaust port 82/84 | ducted or non-ducted to standard |
| Pneumatic connection 1, 2, 3, 4, 5 | sub-base size 18 mm to ISO 15407-1 |
| Pilot interface | to ISO 15218 |
| Note on materials | RoHS compliant |
| Seal material | HNBR, NBR |
| Housing material | die-cast aluminium |
| Screw material | galvanised steel |
| Changeover time | 20 ms |
| Pilot pressure | 3 to 10 bar |
| Weight | 0.32 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VSVA-B-P53U-ZH-A2-1AC1 |
| EAN | 4052568186395 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Nominal size DN [mm] | 5 |
| Medium | Compressed air |
| Function | 5/3 pressurised |
| Flow rate [l/min] | 450 |
| Medientemperatur [°C] | -5 bis 50 |
| Norm | DIN EN 175301-803, DIN ISO 15407-1, ISO 15218, VDMA 24563 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V AC |
| Series | VSVA |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 18 mm, 12 V DC VSVA-B-P53U-ZH-A2-5C1 - Festo 547163
Item FES-547163Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 18 mm, 110 V AC VSVA-B-P53U-ZH-A2-2AC1 - Festo 547203
Item FES-547203Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 18 mm, 230 V AC VSVA-B-P53U-ZH-A2-3AC1 - Festo 547243
Item FES-547243Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 26 mm, 24 V AC VSVA-B-P53U-ZH-A1-1AC1 - Festo 547122
Item FES-547122Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 26 mm, 12 V DC VSVA-B-P53U-ZH-A1-5C1 - Festo 547162
Item FES-547162Alternatives
Solenoid valve 5/2 bistable, ISO 15407-1 18 mm, 24 V DC VSVA-B-B52-ZH-A2-1C1 - Festo 547075
Item FES-547075Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 26 mm, 24 V DC VSVA-B-T32U-AZH-A1-1C1 - Festo 547070
Item FES-547070Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 26 mm, 24 V DC VSVA-B-P53U-ZH-A1-1C1 - Festo 547082
Item FES-547082Solenoid valve 5/2 bistable, ISO 15407-1 26 mm, 24 V DC VSVA-B-B52-ZH-A1-1C1 - Festo 547074
Item FES-547074Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.


