Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/3, port 2 pressurised, port 4 exhausted, ISO 15407-2 26 mm, 24 V DC VSVA-B-P53AD-ZH-A1-1T1L - Festo 8033052
Standard valve 5/3, port 2 pressurised, port 4 exhausted to ISO 15407-2 (26 mm) with 700 l/min standard nominal flow and -0.9 to 10 bar operating pressure. Coil 24 V DC with 1.6 W, electrical connection via 4-pin plug to ISO 15407-2.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve VSVA-B-P53AD-ZH-A1-1T1L pressurises port 2 and exhausts port 4 in the mid-position. Standard nominal flow is 700 l/min at a size of 26 mm to ISO 15407-2.
Benefits
- Interchangeable: standardised port pattern ISO 15407-2, size 26 mm.
- Export-ready: certification CSA (OL), c UL us - Recognized (OL).
- Flow values: 700 l/min at the valve, 700 l/min on a single sub-base, 700 l/min pneumatically linked and 700 l/min linked, flow-optimised.
- Wide pressure range: -0.9 to 10 bar, vacuum included, pilot pressure 3 to 10 bar.
- Solenoid coil: 24 V DC at 1.6 W, duty cycle 100 %. Voltage may fluctuate by ± 10 %.
- Built for the shop floor: degree of protection IP65 and NEMA 4, ambient temperature -5 to 50 °C.
Application
Pilot air is supplied externally, at 3 to 10 bar pilot pressure. Manual override non-detenting. For speed adjustment the exhaust can be throttled via flow control plate or single sub-base. Mounted on a sub-base, any mounting position. Medium compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.
Technical data
| Type | VSVA-B-P53AD-ZH-A1-1T1L |
|---|---|
| Festo part number | 8033052 |
| Valve function | 5/3, port 2 pressurised, port 4 exhausted |
| Actuation type | electrical |
| Width | 26 mm |
| Standard nominal flow rate | 700 l/min |
| Operating pressure | -0.9 to 10 bar |
| Design | piston spool |
| Certification | CSA (OL), c UL us - Recognized (OL) |
| Degree of protection | IP65, NEMA 4 |
| Exhaust function | can be throttled via flow control plate or single sub-base |
| Sealing principle | soft |
| Mounting position | any |
| Manual override | non-detenting |
| Pilot control | piloted |
| Pilot air supply | external |
| Flow direction | any |
| Overlap | negative overlap |
| Signal status display | LED |
| Pilot pressure | 3 to 10 bar |
| Flow rate valve | 700 l/min |
| Flow rate valve on single sub-base | 700 l/min |
| Flow rate valve, pneumatically linked, flow-optimised | 700 l/min |
| Flow rate valve, pneumatically linked | 700 l/min |
| Duty cycle | 100 % |
| Maximum positive test pulse with 0 signal | 1200 µs |
| Maximum negative test pulse with 1 signal | 1100 µs |
| Nominal operating voltage DC | 24 V |
| Coil characteristics | 24 V DC: 1.6 W |
| Surge voltage resistance | 2.5 kV |
| Pollution degree | 3 |
| Permissible voltage fluctuations | ± 10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Relative humidity | 0 - 90 % |
| Ambient temperature | -5 to 50 °C |
| Product weight | 301 g |
| Electrical connection | 4-pin plug to ISO 15407-2 |
| Mounting type | on sub-base |
| Auxiliary pilot air port 12/14 | sub-base size 26 mm to ISO 15407-2 |
| Pilot exhaust port 82/84 | optionally ducted or non-ducted to standard |
| Pneumatic connection 1, 2, 3, 4, 5 | sub-base size 26 mm to ISO 15407-2 |
| Note on materials | RoHS compliant |
| Seal material | FKM, HNBR, NBR |
| Housing material | PA, die-cast aluminium |
| Screw material | galvanised steel |
| Reset method | mechanical spring, electrical actuation |
| Nominal size | 9 mm |
| Medium temperature | -5 to 50 °C |
| Noise level | 85 dB(A) |
| Maximum tightening torque, valve mounting | 1.8 to 2.2 Nm |
| Asymmetric switching time off | 36 ms for pilot side 12 |
| Asymmetric switching time on | 19 ms for pilot side 12, 9 ms for pilot side 14 |
| Weight | 0.33 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VSVA-B-P53AD-ZH-A1-1T1L |
| EAN | 4052568282523 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Nominal size DN [mm] | 9 |
| Medium | Compressed air |
| Function | 5/3, port 2 pressurised, 4 vented |
| Flow rate [l/min] | 700 |
| Medientemperatur [°C] | -5 bis 50 |
| Norm | ISO 15407-2 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | VSVA |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/3, port 2 pressurised, 4 exhausted, ISO 15407-2, width 18 mm VSVA-B-P53AD-ZTR-A2-1T1L - Festo 8039184
Item FES-8039184Solenoid valve 5/3, port 2 pressurised, 4 exhausted, ISO 15407-2, width 18 mm VSVA-B-P53AD-Z-A2-1T1L - Festo 8039186
Item FES-8039186Alternatives
Plug-in solenoid valve 2x 3/2 closed, monostable, ISO 15407-2 26 mm, 24 V DC VSVA-B-T32C-AZD-A1-1T1L - Festo 539150
Item FES-539150Solenoid valve 5/3 mid-position exhausted, ISO 15407-2 26 mm, 24 V DC VSVA-B-P53ED-ZD-A1-1T1L - Festo 560727
Item FES-560727Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.


