Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/2 monostable, ISO 15407-1 26 mm, 230 V AC VSVA-B-M52-AZH-A1-3AC1 - Festo 547238
Standard valve 5/2 monostable to ISO 15407-1 (26 mm) with 1100 l/min standard nominal flow and -0.9 to 16 bar operating pressure. Electrical connection of the 230 V AC coil (2.9 VA pick-up and 2.1 VA holding power) is via form C pin pattern to EN 175301-803.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve VSVA-B-M52-AZH-A1-3AC1 switches double-acting cylinders as a 5/2-way valve and returns to its normal position via pneumatic spring when the signal drops. In size 26 mm to ISO 15407-1 it reaches 1100 l/min standard nominal flow.
Benefits
- Interchangeable: standardised port pattern ISO 15407-1, size 26 mm.
- High flow: 1400 l/min at the valve, 1100 l/min on a single sub-base and 1100 l/min pneumatically linked.
- Operating pressure -0.9 to 16 bar: vacuum can be switched as well, pilot pressure 3 to 10 bar.
- Short switching times: 35 ms on, 43 ms off.
- Coil data: 2.9 VA pick-up and 2.1 VA holding power at 230 V AC, voltage -15 % / +10 %, 100 % duty cycle.
- Dust and jet-water protected: IP65 and NEMA 4, usable at -5 to 50 °C.
Application
Pilot air is supplied externally, at 3 to 10 bar pilot pressure. Manual override non-detenting. On the exhaust side the air can be throttled. Mounted on a sub-base, any mounting position. Medium compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.
Technical data
| Type | VSVA-B-M52-AZH-A1-3AC1 |
|---|---|
| Festo part number | 547238 |
| Valve function | 5/2 monostable |
| Actuation type | electrical |
| Valve size | 26 mm |
| Standard nominal flow rate | 1100 l/min |
| Operating pressure | -0.9 to 16 bar |
| Design | piston spool |
| Reset method | pneumatic spring |
| Degree of protection | IP65, NEMA 4 |
| Nominal size | 9 mm |
| Exhaust function | can be throttled |
| Sealing principle | soft |
| Mounting position | any |
| Conforms to standard | ISO 15407-1, VDMA 24563 |
| Manual override | non-detenting |
| Pilot control | piloted |
| Pilot air supply | external |
| Flow direction | reversible |
| Overlap | positive overlap |
| Signal status display | LED |
| Flow rate valve | 1400 l/min |
| Flow rate valve on single sub-base | 1100 l/min |
| Flow rate valve, pneumatically linked | 1100 l/min |
| Switching time off | 43 ms |
| Switching time on | 35 ms |
| Duty cycle | 100 % |
| Coil characteristics | 230 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Medium temperature | -5 to 50 °C |
| Relative humidity | 0 - 90 % |
| Noise level | 85 dB(A) |
| Pilot medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 to 50 °C |
| Maximum tightening torque, valve mounting | 2 Nm |
| Product weight | 180 g |
| Electrical connection | pin pattern form C to EN 175301-803, with protective earth |
| Mounting type | on sub-base |
| Auxiliary pilot air ports 12, 14 | sub-base size 26 mm to ISO 15407-1 |
| Pilot exhaust port 82/84 | ducted or non-ducted to standard |
| Pneumatic connection 1, 2, 3, 4, 5 | sub-base size 26 mm to ISO 15407-1 |
| Pilot interface | to ISO 15218 |
| Note on materials | RoHS compliant |
| Seal material | HNBR, NBR |
| Housing material | die-cast aluminium |
| Screw material | galvanised steel |
| Pilot pressure | 3 to 10 bar |
| CE marking (see declaration of conformity) | to EU Low Voltage Directive |
| Weight | 0.25 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VSVA-B-M52-AZH-A1-3AC1 |
| EAN | 4052568187545 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Nominal size DN [mm] | 9 |
| Medium | Compressed air |
| Function | 5/2 monostable |
| Flow rate [l/min] | 1100 |
| Medientemperatur [°C] | -5 bis 50 |
| Norm | DIN EN 175301-803, DIN ISO 15407-1, ISO 15218, VDMA 24563 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 230 V AC |
| Series | VSVA |
| Betriebsdruck max [bar] | 16 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/2 monostable, ISO 15407-1 26 mm, 12 V DC VSVA-B-M52-AZH-A1-5C1 - Festo 547158
Item FES-547158Solenoid valve 5/2 monostable, ISO 15407-1 26 mm, 24 V AC VSVA-B-M52-AZH-A1-1AC1 - Festo 547118
Item FES-547118Solenoid valve 5/2 monostable, ISO 15407-1 26 mm, 24 V DC VSVA-B-M52-AZH-A1-1C1 - Festo 547078
Item FES-547078Solenoid valve 5/2 monostable, ISO 15407-1 18 mm, 230 V AC VSVA-B-M52-AZH-A2-3AC1 - Festo 547239
Item FES-547239Solenoid valve 5/2 monostable, ISO 15407-1 18 mm, 110 V AC VSVA-B-M52-AZH-A2-2AC1 - Festo 547199
Item FES-547199Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.


