Images are examples, some edited with AI. The technical data are authoritative. AI notice
Solenoid valve 5/2 bistable, ISO 15407-1 18 mm, 230 V AC VSVA-B-B52-ZH-A2-3AC1 - Festo 547235
Solenoid valve 5/2 bistable for sub-bases to ISO 15407-1 (18 mm): 550 l/min standard nominal flow at -0.9 to 10 bar operating pressure. Coil 230 V AC, 2.9 VA pick-up and 2.1 VA holding power, connected via individual plug form C to EN 175301-803.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The solenoid valve VSVA-B-B52-ZH-A2-3AC1 works as an impulse valve and keeps its switching position after the signal is removed. Standard nominal flow is 550 l/min at a size of 18 mm to ISO 15407-1.
Benefits
- ISO 15407-1: size 18 mm allows replacement by standard valves of the same size without re-piping.
- Operating pressure -0.9 to 10 bar: vacuum can be switched as well, pilot pressure 3 to 10 bar.
- Solenoid coil: 230 V AC at 2.9 VA pick-up and 2.1 VA holding power, duty cycle 100 %. Voltage may fluctuate by -15 % / +10 %.
- Built for the shop floor: degree of protection IP65 and NEMA 4, ambient temperature -5 to 50 °C.
- Performance: flow rate 750 l/min at the valve, 550 l/min on a single sub-base and 550 l/min pneumatically linked.
Application
External pilot air (3 to 10 bar) decouples the pilot stage from the working pressure. Manual override non-detenting. The exhaust air can be throttled. Mounts on a sub-base in any position. Operates with compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation possible, then permanently required.
Technical data
| Type | VSVA-B-B52-ZH-A2-3AC1 |
|---|---|
| Festo part number | 547235 |
| Valve function | 5/2 bistable |
| Actuation type | electrical |
| Valve size | 18 mm |
| Standard nominal flow rate | 550 l/min |
| Operating pressure | -0.9 to 10 bar |
| Design | piston spool |
| Degree of protection | IP65, NEMA 4 |
| Nominal size | 5 mm |
| Exhaust function | can be throttled |
| Sealing principle | soft |
| Mounting position | any |
| Conforms to standard | ISO 15407-1, VDMA 24563 |
| Manual override | non-detenting |
| Pilot control | piloted |
| Pilot air supply | external |
| Flow direction | reversible |
| Overlap | positive overlap |
| Signal status display | LED |
| Flow rate valve | 750 l/min |
| Flow rate valve on single sub-base | 550 l/min |
| Flow rate valve, pneumatically linked | 550 l/min |
| Duty cycle | 100 % |
| Coil characteristics | 230 V AC: 50/60 Hz, pick-up power 2.9 VA, holding power 2.1 VA |
| Permissible voltage fluctuations | -15 % / +10 % |
| Operating medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | lubricated operation possible (then required for further operation) |
| Vibration resistance | transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 |
| Shock resistance | shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 |
| Corrosion resistance class CRC | 0 - no corrosion stress |
| Medium temperature | -5 to 50 °C |
| Relative humidity | 0 - 90 % |
| Noise level | 85 dB(A) |
| Pilot medium | compressed air to ISO 8573-1:2010 [7:4:4] |
| Ambient temperature | -5 to 50 °C |
| Maximum tightening torque, valve mounting | 1 Nm |
| Product weight | 174 g |
| Electrical connection | pin pattern form C to EN 175301-803, with protective earth |
| Mounting type | on sub-base |
| Auxiliary pilot air ports 12, 14 | sub-base size 18 mm to ISO 15407-1 |
| Pilot exhaust port 82/84 | ducted or non-ducted to standard |
| Pneumatic connection 1, 2, 3, 4, 5 | sub-base size 18 mm to ISO 15407-1 |
| Pilot interface | to ISO 15218 |
| Note on materials | RoHS compliant |
| Seal material | HNBR, NBR |
| Housing material | die-cast aluminium |
| Screw material | galvanised steel |
| Changeover time | 15 ms |
| Pilot pressure | 3 to 10 bar |
| CE marking (see declaration of conformity) | to EU Low Voltage Directive |
| Weight | 0.195 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VSVA-B-B52-ZH-A2-3AC1 |
| EAN | 4052568187514 |
| Zolltarifnummer | 84812090 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Aluminium |
| Nominal size DN [mm] | 5 |
| Medium | Compressed air |
| Function | 5/2 bistable |
| Flow rate [l/min] | 550 |
| Medientemperatur [°C] | -5 bis 50 |
| Norm | DIN EN 175301-803, DIN ISO 15407-1, ISO 15218, VDMA 24563 |
| Operating conditions | EN 60068-2-27, EN 60068-2-6, ISO 8573-1 |
| Operating voltage | 230 V AC |
| Series | VSVA |
| Betriebsdruck max [bar] | 10 |
| Protection rating | IP65 |
| Temperature (max.) | 50 |
Downloads
Accessories
Solenoid valve 5/2 bistable, ISO 15407-1 18 mm, 12 V DC VSVA-B-B52-ZH-A2-5C1 - Festo 547155
Item FES-547155Solenoid valve 5/2 bistable, ISO 15407-1 18 mm, 24 V AC VSVA-B-B52-ZH-A2-1AC1 - Festo 547115
Item FES-547115Solenoid valve 5/2 bistable, ISO 15407-1 18 mm, 24 V DC VSVA-B-B52-ZH-A2-1C1 - Festo 547075
Item FES-547075Solenoid valve 5/2 bistable, ISO 15407-1 26 mm, 230 V AC VSVA-B-B52-ZH-A1-3AC1 - Festo 547234
Item FES-547234Solenoid valve 5/2 bistable, ISO 15407-1 26 mm, 110 V AC VSVA-B-B52-ZH-A1-2AC1 - Festo 547194
Item FES-547194Alternatives
Solenoid valve 2x 3/2 open, monostable, ISO 15407-1 26 mm, 24 V DC VSVA-B-T32U-AZH-A1-1C1 - Festo 547070
Item FES-547070Solenoid valve 5/3 mid-position pressurised, ISO 15407-1 26 mm, 24 V DC VSVA-B-P53U-ZH-A1-1C1 - Festo 547082
Item FES-547082Solenoid valve 5/2 bistable, ISO 15407-1 26 mm, 24 V DC VSVA-B-B52-ZH-A1-1C1 - Festo 547074
Item FES-547074Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.



