Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pneumatic-electric converter -1 bar, changeover contact, G1/8 VPE-1/8-2N-SW - Festo 12595
The pneumatic-electric converter VPE-1/8-2N-SW converts a pneumatic pressure signal into an electrical switching signal, pressure range -1 bar. The output is a changeover contact. G1/8 port, degree of protection IP67 and ambient temperature 0 to 60 °C.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The Festo pneumatic-electric converter VPE-1/8-2N-SW converts a pneumatic pressure signal into an electrical switching signal, pressure range -1 bar. Operating medium for VPE-1/8-2N-SW: compressed air.
Benefits
- Pressure range -1 bar, operating pressure -0.95 bar
- Switch-on point -0.25 bar, switch-off point ≤ 0.1 bar
- Degree of protection IP67, ambient temperature 0 to 60 °C
- 3 connecting strands, operating voltage 12 to 250 V DC
- G1/8 port, max switching frequency 1 Hz
- Changeover contact
Application
A typical use is as an interface between pneumatic control and electrical evaluation, for example to feed back pilot signals.
Technical data
| Type | VPE-1/8-2N-SW |
|---|---|
| Approval | CCC |
| CE marking (see declaration of conformity) | To EU Low Voltage Directive |
| Measured variable | Relative pressure |
| Measuring method | Pneumatic-electric pressure converter |
| Operating pressure | -0.95 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Medium temperature | 0 to 60 °C |
| Ambient temperature | 0 to 60 °C |
| Switching element function | Changeover contact |
| Maximum switching frequency | 1 Hz |
| Minimum load current | 100 |
| Electrical connection | 3 connecting strands |
| Type of mounting | On mounting frame 2n, with through-hole |
| Mounting position | Any |
| Pneumatic connection | G1/8 |
| Material housing | PA, POM, steel, VMQ (silicone) |
| Material switching contact | Silver |
| Degree of protection | IP67 |
| Pressure measuring range | -1 bar |
| Switch-on point | -0.25 bar |
| Switch-off point | ≤ 0.1 bar |
| Operational voltage range AC | 12 to 250 V |
| Operating voltage range DC | 12 to 250 V |
| Cable length | 0.57 m |
| Material electrical connection | Tin-plated |
| Material membrane | CR |
| Weight (price list) | 50 g |
| Weight | 0.05 kg |
| Manufacturer | Festo |
| Hersteller-Nr | VPE-1/8-2N-SW |
| EAN | 4052568112059 |
| Zolltarifnummer | 85365080 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | POM |
| Thread | G 1/8 |
| Medium | Compressed air |
| Function | Changeover contact |
| Operating conditions | ISO 8573-1 |
| Betriebsdruck max [bar] | -0.95 |
| Protection rating | IP67 |
| Temperaturbereich | 0-60 °C |
| Temperature (max.) | 60 |
Downloads
Accessories
Connecting cable M8x1, 3-pin, 3-wire, socket, angled, open end 2.5 m SIM-M8-3WD-2,5-PSL-PU - Festo 159424
Item FES-159424Pneumatic-electric converter -1 bar, changeover contact, G1/8 VPE-1/8-SW - Festo 12593
Item FES-12593Vacuum switch -0.95 to -0.2 bar, changeover contact, G1/8 VPEV-1/8 - Festo 150261
Item FES-150261Vacuum switch -0.8 to -0.2 bar, changeover contact, M5, M8x1 plug (4-pin) VPEV-W-S-LED-GH - Festo 152617
Item FES-152617Vacuum switch -0.8 to -0.2 bar, changeover contact, M5 VPEV-W-KL-LED-GH - Festo 152619
Item FES-152619Vacuum switch -0.95 to -0.2 bar, changeover contact, G1/8 VPEV-1/8-M12 - Festo 192489
Item FES-192489Stop size M8, genuine accessory from the Festo sensor range SDA-8X1-B - Festo 11542
Item FES-11542Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.







