Images are examples, some edited with AI. The technical data are authoritative. AI notice

Solenoid valve 5/2-way monostable valve size 20 mm VMPA2-M1H-MS-PI - Festo 571333

Festo ✓ Original product Brand new

The solenoid valve VMPA2-M1H-MS-PI controls double-acting actuators and is reset by a mechanical spring once the signal drops. It delivers a standard nominal flow rate of 670 to 840 l/min at an operating pressure of -0.9 to 8 bar, built with valve size 20 mm.

Net
€83.77
excl. VAT
Item FES-571333
Manufacturer no. VMPA2-M1H-MS-PI

Available

Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

The VMPA2-M1H-MS-PI from the Festo VMPA2 range is a solenoid-actuated monostable 5/2-way valve with a standard nominal flow rate of 670 to 840 l/min and an operating pressure of -0.9 to 8 bar.

Benefits

  • Valve size 20 mm, mounting with through-hole
  • Standard nominal flow rate 670 to 840 l/min
  • Operating pressure -0.9 to 8 bar, pilot pressure 3 to 8 bar
  • Approval c UL us - Recognized (OL)
  • Switching time 8 ms on, 36 ms off, switching frequency up to 2 Hz
  • Degree of protection IP65, ambient temperature -5 to 50 °C

Applications

In operation it controls double-acting actuators and is reset by a mechanical spring once the signal drops. The VMPA2-M1H-MS-PI suits double-acting cylinders, rotary actuators and grippers. The VMPA2-M1H-MS-PI is mounted with through-hole. Operating medium: compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation is possible but must then continue.

Technical data

FeatureValue
TypeVMPA2-M1H-MS-PI
Valve function5/2-way, monostable
Type of actuationElectrical
Valve size20 mm
Standard nominal flow rate670 to 840 l/min
Operating pressure-0.9 to 8 bar
DesignPiston spool
Type of resetMechanical spring
Approvalc UL us - Recognized (OL)
Degree of protectionIP65, in mounted state, to IEC 60529
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting, non-detenting
Type of pilotingPiloted
Flow directionReversible
Spool overlapPositive overlap
Signal status displayYes
Pilot pressure3 to 8 bar
Suitability for vacuumYes
Switching time off36 ms
Switching time on8 ms
Maximum positive test pulse with 0 signal400 µs
Maximum negative test pulse with 1 signal900 µs
Permissible voltage fluctuations±25%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (lubrication then required for further operation)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC1 - Low corrosion stress
Storage temperature-20 to 40 °C
Media temperature-5 to 50 °C
Relative air humidityMax. 90% at 40 °C
Ambient temperature-5 to 50 °C
Maximum tightening torque for valve mounting0.65 Nm
Product weight100 g
Type of mountingWith through-hole
Note on materialsRoHS compliant
Material sealsNBR
Material housingDie-cast aluminium
Standard nominal flow rate with QS-8670 l/min
Standard nominal flow rate with QS-10840 l/min
Note on standard nominal flow rateMPA-S: 670 l/min, MPA-L: 840 l/min
CE mark (see declaration of conformity)To EU EMC Directive
Maximum switching frequency2 Hz
Weight0.1 kg
ManufacturerFesto
Hersteller-NrVMPA2-M1H-MS-PI
EAN4052568217853
Zolltarifnummer84812090
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
Seal materialNBR
MediumCompressed air
Function5/2 monostable
Flow rate [l/min]670840
Actuation typeElectrical
CertificationIEC 60529
Operating conditionsEN 60068-2-27, EN 60068-2-6, ISO 8573-1
SeriesVMPA2
Betriebsdruck max [bar]8
Protection ratingIP65
Temperature (max.)50

Downloads

Accessories

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.