Images are examples, some edited with AI. The technical data are authoritative. AI notice

Solenoid valve 3/2-way normally open valve size 14 mm VMPA14-M1H-W-PI - Festo 573723

Festo ✓ Original product Brand new

The Festo VMPA14-M1H-W-PI is open without a signal and only shuts off the working port when switched. It delivers a standard nominal flow rate of 300 to 340 l/min at an operating pressure of -0.9 to 10 bar, built with valve size 14 mm. Degree of protection IP65, ambient temperature -5 to 50 °C.

Net
€86.46
excl. VAT
Item FES-573723
Manufacturer no. VMPA14-M1H-W-PI
Question about this item
  • Specialist dealer since 2009
  • Invoice payment for regular customers
  • Worldwide shipping
  • Technical questions clarified with the manufacturer

Description

For single-acting cylinders, blow-off air and pneumatic pilot signals, the VMPA14-M1H-W-PI is a solenoid-actuated normally open 3/2-way valve with a standard nominal flow rate of 300 to 340 l/min and an operating pressure of -0.9 to 10 bar.

Benefits

  • Valve size 14 mm, mounting with through-hole
  • Standard nominal flow rate 300 to 340 l/min
  • Operating pressure -0.9 to 10 bar, pilot pressure 3 to 8 bar
  • Manual override: detenting, non-detenting
  • Corrosion resistance class CRC 1
  • Approval c CSA us (OL), c UL us - Recognized (OL)

Applications

As for switching behaviour, the valve is open without a signal and only shuts off the working port when switched. The VMPA14-M1H-W-PI is used for single-acting cylinders, blow-off air and pneumatic pilot signals. The VMPA14-M1H-W-PI is mounted with through-hole. Operating medium: compressed air to ISO 8573-1:2010 [7:4:4]. Lubricated operation is possible but must then continue.

Technical data

FeatureValue
TypeVMPA14-M1H-W-PI
Valve function3/2-way, open, monostable
Type of actuationElectrical
Valve size14 mm
Standard nominal flow rate300 to 340 l/min
Operating pressure-0.9 to 10 bar
DesignPiston spool
Type of resetPneumatic spring
Approvalc CSA us (OL), c UL us - Recognized (OL)
Degree of protectionIP65, in mounted state, to IEC 60529
Sealing principleSoft
Mounting positionAny
Manual overrideDetenting, non-detenting
Type of pilotingPiloted
Flow directionReversible
Spool overlapPositive overlap
Signal status displayYes
Pilot pressure3 to 8 bar
Suitability for vacuumYes
Switching time off20 ms
Switching time on12 ms
Maximum positive test pulse with 0 signal400 µs
Maximum negative test pulse with 1 signal200 µs
Permissible voltage fluctuations±25%
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot mediumLubricated operation possible (lubrication then required for further operation)
Vibration resistanceTransport application test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistanceShock test with severity level 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistance class CRC1 - Low corrosion stress
Storage temperature-20 to 40 °C
Media temperature-5 to 50 °C
Relative air humidityMax. 90% at 40 °C
Ambient temperature-5 to 50 °C
Maximum tightening torque for valve mounting0.65 Nm
Product weight77 g
Type of mountingWith through-hole
Note on materialsRoHS compliant
Material sealsNBR
Material housingDie-cast aluminium
Standard nominal flow rate with QS-8300 to 340 l/min
Note on standard nominal flow rateMPA-S: 340 l/min, MPA-L: 300 l/min
CE mark (see declaration of conformity)To EU EMC Directive
Weight0.075 kg
ManufacturerFesto
Hersteller-NrVMPA14-M1H-W-PI
EAN4052568260231
Zolltarifnummer84812090
GPSR HerstellerdatenFesto Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com
ArtikelzustandNew
Artikel-AuthentizitätOriginal product
MaterialAluminium
Seal materialNBR
MediumCompressed air
Function3/2 open monostable
Flow rate [l/min]300340
Actuation typeElectrical
CertificationIEC 60529
Operating conditionsEN 60068-2-27, EN 60068-2-6, ISO 8573-1
SeriesVMPA14
Betriebsdruck max [bar]10
Protection ratingIP65
Temperature (max.)50

Downloads

Accessories

Alternatives

Questions about this item

Any other question?

Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.