Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pressure sensor for vacuum 0 to -1 bar, 2x PNP/NPN, IO-Link, with display SPAN-V1R-R18M-PNLK-PNVBA-L1 - Festo 8035538
Measuring range 0 to -1 bar: the pressure sensor SPAN-V1R-R18M-PNLK-PNVBA-L1 monitors relative pressure and switches via 2 switching outputs, PNP/NPN switchable, plus analogue output 0 to 10 V, 4 to 20 mA or 1 to 5 V. Accuracy 1.5 %FS, degree of protection IP40 and ambient temperature 0 to 50 °C.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Designed for vacuum of 0 to -1 bar, the Festo pressure sensor SPAN-V1R-R18M-PNLK-PNVBA-L1 monitors relative pressure and switches via 2 switching outputs, PNP/NPN switchable, plus analogue output 0 to 10 V, 4 to 20 mA or 1 to 5 V. Operating medium for SPAN-V1R-R18M-PNLK-PNVBA-L1: compressed air and inert gases, medium temperature 0 to 50 °C.
Benefits
- Measuring range 0 to -1 bar, overload range up to 5 bar
- Accuracy 1.5 %FS, repeatability ± 0.3 %FS
- Degree of protection IP40, ambient temperature 0 to 50 °C
- Male thread R1/8, female thread M5, electrical: plug connection (4-pin)
- Analogue output 0 to 10 V, 4 to 20 mA or 1 to 5 V, IO-Link (Device V 1.1) for parameterisation and diagnostics
- 2 switching outputs, PNP/NPN switchable, N/C or N/O switchable, output current up to 100 mA
Application
Typical tasks include vacuum monitoring on suction grippers, ejectors and vacuum circuits. SPAN-V1R-R18M-PNLK-PNVBA-L1 is mounted in a front panel, with a wall/surface bracket or via the thread, in any position.
Technical data
| Type | SPAN-V1R-R18M-PNLK-PNVBA-L1 |
|---|---|
| Approval | RCM, c UL us - Listed (OL) |
| CE marking (see declaration of conformity) | To EU EMC Directive, to EU RoHS Directive |
| KC mark | KC EMC |
| Certificate issuing authority | UL E322346 |
| Note on materials | RoHS-compliant |
| Measured variable | Relative pressure |
| Measuring method | Piezoresistive pressure sensor |
| Pressure measuring range initial value | 0 bar |
| Pressure measuring range full scale value | -1 bar |
| Overload range | 5 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], inert gases |
| Note on operating and pilot medium | Lubricated operation possible |
| Medium temperature | 0 to 50 °C |
| Ambient temperature | 0 to 50 °C |
| Accuracy FS | 1.5 %FS |
| Repeatability in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | 2x PNP or 2x NPN, switchable |
| Switching function | Window comparator, threshold comparator, auto difference monitoring |
| Switching element function | N/C or N/O contact, switchable |
| Maximum output current | 100 mA |
| Analogue output | 0 - 10 V, 4 - 20 mA, 1 - 5 V |
| Maximum load resistance current output | 500 Ohm |
| Minimum load resistance voltage output | 20 kOhm |
| Short circuit protection | Yes |
| Protocol | IO-Link |
| IO-Link, protocol | Device V 1.1 |
| IO-Link, Profile | Smart Sensor Profile |
| IO-Link, Function classes | Teach channel, diagnosis, identification, binary data channel (BDC), process data variable (PDV) |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO-Mode support | Yes |
| IO-Link, port type | A |
| IO-Link, Process data length OUT | 0 Byte |
| IO-Link, Process data length IN | 2 Byte |
| IO-Link, Process data content IN | 14 bit PDV (pressure measured value), 2 bit BDC (pressure monitoring) |
| IO-Link, Min. cycle time | 3 ms |
| IO-Link, Data storage required | 500 Byte |
| Operating voltage range DC | 15 to 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | Connection pattern L1J |
| Electrical connection 1, number of connections/cores | 4 |
| Type of mounting | Front panel mounting, via wall/surface bracket, with thread |
| Mounting position | Any |
| Pneumatic connection | Male thread R1/8, female thread M5 |
| Product weight | 46 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Fluoro rubber, NBR, reinforced PA, brass, nickel-plated |
| Display type | Illuminated LCD |
| Displayable unit(s) | MPa, bar, inchH2O, inchHg, kgf/cm², mbar, mmHg, psi, kPa |
| Setting options | IO-Link, Teach-in, via display and keys |
| Tamper protection | IO-Link, PIN code |
| Threshold setting range | 0 to 100 % |
| Hysteresis setting range | 0 to 90 % |
| Degree of protection | IP40 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Weight | 0.135 kg |
| Manufacturer | Festo |
| Hersteller-Nr | SPAN-V1R-R18M-PNLK-PNVBA-L1 |
| EAN | 4052568284787 |
| Zolltarifnummer | 90262020 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Thread | R 1/8 |
| Medium | Compressed air, neutral gases |
| Operating conditions | ISO 8573-1 |
| Series | SPAN |
| Protection rating | IP40 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Accessories
Connecting cable M8x1, 3-pin, 3-wire, socket, angled, open end 2.5 m SIM-M8-3WD-2,5-PSL-PU - Festo 159424
Item FES-159424Pressure sensor for vacuum 0 to -1 bar, 2x PNP/NPN, with display SPAN-V1R-R18M-PN-PN-L1 - Festo 8035549
Item FES-8035549Pressure sensor for vacuum 0 to -1 bar, 2x PNP/NPN, IO-Link, with display SPAN-V1R-G18M-PNLK-PNVBA-L1 - Festo 8035535
Item FES-8035535Pressure sensor for vacuum 0 to -1 bar, 2x PNP/NPN, IO-Link, with display SPAN-V1R-Q4-PNLK-PNVBA-L1 - Festo 8035543
Item FES-8035543Pressure sensor for vacuum 0 to -1 bar, 2x PNP/NPN, with display SPAN-V1R-G18M-PN-PN-L1 - Festo 8035546
Item FES-8035546Pressure sensor for vacuum 0 to -1 bar, 2x PNP/NPN, with display SPAN-V1R-Q4-PN-PN-L1 - Festo 8035554
Item FES-8035554Pressure sensor -1 to 1 bar, 2x PNP/NPN, IO-Link, with display SPAN-B2R-R18M-PNLK-PNVBA-L1 - Festo 8035537
Item FES-8035537Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.




