Images are examples, some edited with AI. The technical data are authoritative. AI notice
Pressure sensor 0 to 10 bar, 2x PNP/NPN, IO-Link, with display SPAN-P10R-M5F-PNLK-PNVBA-L1 - Festo 8035539
Measuring range 0 to 10 bar: the pressure sensor SPAN-P10R-M5F-PNLK-PNVBA-L1 detects relative pressure and switches via 2 switching outputs, PNP/NPN switchable, plus analogue output 0 to 10 V, 4 to 20 mA or 1 to 5 V. Female thread M5, plug connection (4-pin) and operating voltage 15 to 30 V DC.
Available
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Designed for pressures of 0 to 10 bar, the Festo pressure sensor SPAN-P10R-M5F-PNLK-PNVBA-L1 detects relative pressure and switches via 2 switching outputs, PNP/NPN switchable, plus analogue output 0 to 10 V, 4 to 20 mA or 1 to 5 V. Operating medium for SPAN-P10R-M5F-PNLK-PNVBA-L1: compressed air and inert gases, medium temperature 0 to 50 °C.
Benefits
- Measuring range 0 to 10 bar, overload range up to 15 bar
- Female thread M5, electrical: plug connection (4-pin)
- 2 switching outputs, PNP/NPN switchable, N/C or N/O switchable, output current up to 100 mA
- Degree of protection IP40, ambient temperature 0 to 50 °C
- Analogue output 0 to 10 V, 4 to 20 mA or 1 to 5 V, IO-Link (Device V 1.1) for parameterisation and diagnostics
- Accuracy 1.5 %FS, repeatability ± 0.3 %FS
Application
Typical tasks include monitoring supply and working pressure on machines and in compressed air networks. SPAN-P10R-M5F-PNLK-PNVBA-L1 is mounted in a front panel or with a wall/surface bracket, in any position.
Technical data
| Type | SPAN-P10R-M5F-PNLK-PNVBA-L1 |
|---|---|
| Approval | RCM, c UL us - Listed (OL) |
| CE marking (see declaration of conformity) | To EU EMC Directive, to EU RoHS Directive |
| KC mark | KC EMC |
| Certificate issuing authority | UL E322346 |
| Note on materials | RoHS-compliant |
| Measured variable | Relative pressure |
| Measuring method | Piezoresistive pressure sensor |
| Pressure measuring range initial value | 0 bar |
| Pressure measuring range full scale value | 10 bar |
| Overload range | 15 bar |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], inert gases |
| Note on operating and pilot medium | Lubricated operation possible |
| Medium temperature | 0 to 50 °C |
| Ambient temperature | 0 to 50 °C |
| Accuracy FS | 1.5 %FS |
| Repeatability in ± %FS | 0.3 %FS |
| Temperature coefficient in ± %FS/K | 0.05 %FS/K |
| Switching output | 2x PNP or 2x NPN, switchable |
| Switching function | Window comparator, threshold comparator, auto difference monitoring |
| Switching element function | N/C or N/O contact, switchable |
| Maximum output current | 100 mA |
| Analogue output | 0 - 10 V, 4 - 20 mA, 1 - 5 V |
| Maximum load resistance current output | 500 Ohm |
| Minimum load resistance voltage output | 20 kOhm |
| Short circuit protection | Yes |
| Protocol | IO-Link |
| IO-Link, protocol | Device V 1.1 |
| IO-Link, Profile | Smart Sensor Profile |
| IO-Link, Function classes | Teach channel, diagnosis, identification, binary data channel (BDC), process data variable (PDV) |
| IO-Link, communication mode | COM2 (38.4 kBaud) |
| IO-Link, SIO-Mode support | Yes |
| IO-Link, port type | A |
| IO-Link, Process data length OUT | 0 Byte |
| IO-Link, Process data length IN | 2 Byte |
| IO-Link, Process data content IN | 14 bit PDV (pressure measured value), 2 bit BDC (pressure monitoring) |
| IO-Link, Min. cycle time | 3 ms |
| IO-Link, Data storage required | 500 Byte |
| Operating voltage range DC | 15 to 30 V |
| Reverse polarity protection | For all electrical connections |
| Electrical connection 1, connection type | Plug |
| Electrical connection 1, connector system | Connection pattern L1J |
| Electrical connection 1, number of connections/cores | 4 |
| Type of mounting | Front panel mounting, via wall/surface bracket |
| Mounting position | Any |
| Pneumatic connection | Female thread M5 |
| Product weight | 34 g |
| Material housing | Reinforced PA |
| Material in contact with the medium | Fluoro rubber, NBR, reinforced PA, brass, nickel-plated |
| Display type | Illuminated LCD |
| Displayable unit(s) | MPa, bar, inchH2O, inchHg, kPa, kgf/cm², mbar, mmHg, psi |
| Setting options | IO-Link, Teach-in, via display and keys |
| Tamper protection | IO-Link, PIN code |
| Threshold setting range | 0 to 100 % |
| Hysteresis setting range | 0 to 90 % |
| Degree of protection | IP40 |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Weight | 0.039 kg |
| Manufacturer | Festo |
| Hersteller-Nr | SPAN-P10R-M5F-PNLK-PNVBA-L1 |
| EAN | 4052568284794 |
| Zolltarifnummer | 90262020 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| Thread | M5 |
| Measuring range max. [bar] | 10 |
| Medium | Compressed air, neutral gases |
| Operating conditions | ISO 8573-1 |
| Series | SPAN |
| Protection rating | IP40 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Accessories
Connecting cable M8x1, 3-pin, 3-wire, socket, angled, open end 2.5 m SIM-M8-3WD-2,5-PSL-PU - Festo 159424
Item FES-159424Pressure sensor 0 to 10 bar, 2x PNP/NPN, with display SPAN-P10R-M5F-PN-PN-L1 - Festo 8035550
Item FES-8035550Pressure sensor 0 to 10 bar, 2x PNP/NPN, IO-Link, with display SPAN-P10R-Q4-PNLK-PNVBA-L1 - Festo 8035541
Item FES-8035541Pressure sensor 0 to 10 bar, 2x PNP/NPN, IO-Link, with display SPAN-P10R-R18M-PNLK-PNVBA-L1 - Festo 8035536
Item FES-8035536Pressure sensor 0 to 10 bar, 2x PNP/NPN, with display SPAN-P10R-G18M-PN-PN-L1 - Festo 8035544
Item FES-8035544Pressure sensor 0 to 10 bar, 2x PNP/NPN, IO-Link, with display SPAN-P10R-G18M-PNLK-PNVBA-L1 - Festo 8035533
Item FES-8035533Pressure sensor 0 to 10 bar, 2x PNP/NPN, with display SPAN-P10R-R18M-PN-PN-L1 - Festo 8035547
Item FES-8035547Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.





