Images are examples, some edited with AI. The technical data are authoritative. AI notice
T-shape vacuum generator with switch-on valve and pressure transmitter Laval nozzle 0.7 mm vacuum 92 % OVEL-7-H-15-PQ-VQ4-UA-C-A - Festo 8049050
The vacuum generator OVEL-7-H-15-PQ-VQ4-UA-C-A turns compressed air into up to 92 % vacuum and draws up to 17 l/min against atmosphere. Integrated functions: electric switch-on valve, flow control, filter, electric ejector pulse and pressure transmitter. Maximum vacuum is reached at an operating pressure of just 4.5 bar.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
The vacuum generator OVEL-7-H-15-PQ-VQ4-UA-C-A works with a 0.7 mm Laval nozzle and requires 2 to 7 bar operating pressure, nominal 4 bar. Ejector characteristic: high vacuum, Standard.
Benefits
- Vacuum up to 92 %, reached at 4.5 bar operating pressure
- Suction flow up to 17 l/min against atmosphere, at 4 bar operating pressure
- Fast release via ejector pulse, release time 1.2 s at nominal operating pressure
- Electrics: degree of protection IP40, 24 V DC: 1 W
- Sound pressure level 61 dB(A) at nominal operating pressure, open silencer
- Product weight 88 g, grid dimension 15 mm
Applications
For dense surfaces where high vacuum defines the holding force, for example sheet metal, glass or film on a smooth carrier. Type of mounting: with through-hole. Lubricated operation is not possible.
Technical data
| Nominal size, Laval nozzle | 0.70 mm |
|---|---|
| Grid dimension | 15 mm |
| Silencer design | Open |
| Mounting position | Any |
| Ejector characteristic | High vacuum, Standard |
| Grade of filtration | 40 µm |
| Manual override | Non-detenting |
| Integrated function | Open silencer, Electric switch-on valve, Flow control, Filter, Electric ejector pulse, Pressure transmitter |
| Design | T-shape |
| Valve function | Closed |
| Measurement method | Piezoresistive pressure sensor |
| Operating pressure for maximum suction flow rate | 4 bar |
| Operating pressure | 2 to 7 bar |
| Operating pressure for maximum vacuum | 4.5 bar |
| Maximum vacuum | 92 % |
| Nominal operating pressure | 4 bar |
| Maximum suction flow rate against atmosphere | 17 l/min |
| Release time at nominal operating pressure | 1.2 s |
| Analogue output | 0 - 10 V |
| Operational voltage range DC | 21.6 to 26.4 V |
| Duty cycle | 100 % |
| Characteristic coil data | 24 V DC: 1 W |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation not possible |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Media temperature | 0 to 50 °C |
| Sound pressure level at nominal operating pressure | 61 dB(A) |
| Degree of protection | IP40 |
| Ambient temperature | 0 to 50 °C |
| Product weight | 88 g |
| Operating voltage range, DC sensor | 18 to 30 V |
| Pressure measuring range | -1 bar |
| Electrical connection input, function | Ejector pulse, Vacuum generation |
| Electrical connection input, connection type | 2x plugs |
| Electrical connection input, connector system | Plug pattern H |
| Electrical connection input, number of connections/cores | 2 |
| Input electrical connection, mounting type | Snap-locking |
| Electrical connection output, function | Sensor |
| Electrical connection output, connection type | Cable |
| Electrical connection output, connector system | Open end |
| Electrical connection output, number of connections/cores | 3 |
| Cable characteristic | Suitable for drag chains |
| Cable diameter | 2.9 mm |
| Cable diameter tolerance | ± 0.1 mm |
| Cable length | 2.5 m |
| Nominal cross section conductor | 0.14 mm² |
| Type of mounting | With through-hole |
| Pneumatic connection, port 1 | For tubing O.D. 4 mm |
| Pneumatic connection, port 3 | Open silencer |
| Vacuum connection | For tubing O.D. 4 mm |
| Cable sheath colour | Grey |
| Material connecting thread | POM |
| Note on materials | RoHS compliant |
| Material seals | NBR |
| Material receiver nozzle | POM |
| Material filter | POM |
| Material housing | Reinforced PA |
| Material cable sheath | PVC |
| Material adjusting screw | Steel |
| Material silencer | PE |
| Material screws | Steel |
| Material transmitter nozzle | Wrought aluminium alloy |
| Weight | 0.145 kg |
| Manufacturer | Festo |
| Hersteller-Nr | OVEL-7-H-15-PQ-VQ4-UA-C-A-V1V# |
| EAN | 4052568295165 |
| Zolltarifnummer | 84141089 |
| GPSR Herstellerdaten | Festo Vertrieb GmbH&Co. KG, Festo Campus 1, DE-73734 Esslingen, festo.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Material | Polyamide (PA) |
| For hose OD [mm] | 4 |
| Nominal size DN [mm] | 0,7 |
| Seal material | NBR |
| Medium | Compressed air |
| Function | closed |
| Flow rate [l/min] | 17 |
| Filter grade [µm] | 40 |
| Operating conditions | ISO 8573-1 |
| Operating voltage | 24 V DC |
| Series | OVEL |
| Betriebsdruck max [bar] | 7 |
| Protection rating | IP40 |
| Temperaturbereich | 0-50 °C |
| Temperature (max.) | 50 |
Downloads
Accessories
Suction cup insert PE plug-in ejector pulse up to 0.5 bar OASI-20 - Festo 1048877
Item FES-1048877Suction cup insert PE plug-in ejector pulse up to 2 bar OASI-30 - Festo 1048880
Item FES-1048880Suction cup insert PE plug-in ejector pulse up to 5 bar OASI-40 - Festo 1048881
Item FES-1048881Suction cup insert PE plug-in ejector pulse up to 5 bar OASI-50 - Festo 1048884
Item FES-1048884Suction cup insert PE plug-in ejector pulse up to 0.5 bar OASI-20-E - Festo 1072015
Item FES-1072015Show 4 more items
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.




