2/2-way solenoid valve, brass, G 3/8, DN 16, normally closed, FKM diaphragm, 24 V AC - E.MC

The FKM diaphragm makes this brass valve the choice for warmer media up to +120 °C and for light oil up to 20 cSt. It shuts G 3/8 lines when de-energised and switches, force-assisted, from 0 bar. On AC supply (24 V AC) it is rated for up to 10 bar, and up to 7 bar for light oil up to 20 cSt.

Advantages

• Nominal size DN 16, Kv 68 l/min (Cv 4.8 per E.MC), overall length 69 mm.
• No minimum pressure: force-assisted diaphragm, operating pressure 0 to 10 bar (24 V AC).
• FKM diaphragm up to +120 °C, also for light oil up to 20 cSt (max. 7 bar).
• Supplied complete with solenoid coil and connector, IP 65 protection.

Applications

• Light oil up to 20 cSt at max. 7 bar in low-pressure lines.
• Water and air with media temperatures beyond the range of an NBR diaphragm, up to +120 °C.
• Neutral gases and compressed air in G 3/8 lines where the same valve type is also used for oil.

Accessories and spare parts

A replacement solenoid coil, type Q for 24 V AC, is available for this valve. Replacement diaphragms in NBR, FKM and EPDM are sold separately. They fit all valves of this series in G 3/8, G 1/2 and G 3/4 and also let you change the seal material if the medium changes.