2/2-way solenoid valve, stainless steel, G 3/8, DN 16, normally closed, FKM seal, 12 V DC - E.MC

Where no brass may be used in the media circuit, this valve opens and shuts G 3/8 lines with a 1.4306 stainless steel body. The force-assisted diaphragm opens even without inlet pressure, and the FKM seal works from -20 to +120 °C. The DC version (12 V DC) operates from 0 to 6 bar, with light oil up to 20 cSt at max. 4 bar.

Advantages

• 1.4306 stainless steel body, stainless internals, FKM seal for -20 to +120 °C.
• No minimum pressure: force-assisted diaphragm, operating pressure 0 to 6 bar (12 V DC).
• Nominal size DN 16, Kv 68 l/min (Cv 4.8 per E.MC), overall length 69 mm.
• Supplied complete with solenoid coil and connector, IP 65 protection.

Applications

• Media up to +120 °C where a brass body is not an option.
• Shutting off unpressurised liquids in G 3/8 lines, since no minimum pressure is required.
• Water and compressed air lines in systems where non-ferrous metal in contact with the medium is to be avoided.

Accessories and spare parts

A replacement solenoid coil, type Q for 12 V DC, is available for this valve. Replacement diaphragms in NBR, FKM and EPDM are sold separately. They fit all valves of this series in G 3/8, G 1/2 and G 3/4 and also let you change the seal material if the medium changes.