2/2-way solenoid valve, brass, G 3/8, DN 16, normally closed, EPDM diaphragm, 12 V DC - E.MC

This version with an EPDM diaphragm is intended for hot water and air up to +120 °C. It shuts G 3/8 lines tight when de-energised and opens, force-assisted, from 0 bar. The DC version (12 V DC) operates from 0 to 6 bar.

Advantages

• EPDM diaphragm for air and hot water from -10 to +120 °C.
• No minimum pressure: force-assisted diaphragm, operating pressure 0 to 6 bar (12 V DC).
• Nominal size DN 16, Kv 68 l/min (Cv 4.8 per E.MC), overall length 69 mm.
• Supplied complete with solenoid coil and connector, IP 65 protection.

Applications

• Warm water supply to cleaning and washing systems.
• Compressed air and water in the same system section where oily or greasy media are excluded.
• Hot water circuits and rinsing lines with temperatures up to +120 °C.

Accessories and spare parts

A replacement solenoid coil, type Q for 12 V DC, is available for this valve. Replacement diaphragms in NBR, FKM and EPDM are sold separately. They fit all valves of this series in G 3/8, G 1/2 and G 3/4 and also let you change the seal material if the medium changes.