2/2-way solenoid valve, brass, G 3/8, DN 16, normally closed, NBR diaphragm, 24 V AC - E.MC

The valve switches compressed air, neutral gases and water in G 3/8 lines (DN 16). Because the diaphragm is force-assisted, no minimum pressure is needed and it opens even with an unpressurised inlet or in gravity-fed lines. On AC supply (24 V AC) it is rated for up to 10 bar, and up to 7 bar for light oil up to 20 cSt.

Advantages

• Nominal size DN 16, Kv 68 l/min (Cv 4.8 per E.MC), overall length 69 mm.
• No minimum pressure: force-assisted diaphragm, operating pressure 0 to 10 bar (24 V AC).
• Brass body, brass and stainless steel internals, NBR diaphragm for -10 to +80 °C.
• Supplied complete with solenoid coil and connector, IP 65 protection.

Applications

• Cooling water supply to tools and heat exchangers in G 3/8 lines.
• Switching compressed air or neutral gases on machines and test stations.
• Filling or draining tanks by gravity, since the valve opens from 0 bar.

Accessories and spare parts

A replacement solenoid coil, type Q for 24 V AC, is available for this valve. Replacement diaphragms in NBR, FKM and EPDM are sold separately. They fit all valves of this series in G 3/8, G 1/2 and G 3/4 and also let you change the seal material if the medium changes.