2/2-way solenoid valve, brass, G 1-1/4, EPDM seal, normally closed, 24 V DC - E.MC

This 2/2-way solenoid valve from the E.MC ZS series opens and shuts G 1-1/4 lines on a 24 V DC control signal. Because the armature lifts the diaphragm directly, it switches from 0 bar and needs no minimum differential pressure. A Kv of 342 l/min makes it a fit for main lines and filling tanks.

Advantages

• Assisted lift: switches from 0 bar, including unpressurised lines and gravity feeds.
• Flow Kv 342 l/min (Cv 24) at a 32 mm nominal size.
• EPDM seal for hot water up to 120 °C.
• Brass body, internals in brass and stainless steel, EPDM seal.
• Type R coil drawing 45 W at 24 V DC, IP 65 protection, voltage tolerance ± 10 %.

Applications

• Hot and warm water circuits up to 120 °C, for example at cleaning and rinsing stations.
• Filling tanks and shutting off high-flow main lines.
• Feeds from header tanks or lines with varying pressure, as the valve switches from 0 bar.

Accessories and spare parts

• Replacement solenoid coil type R for 24 V DC, exchangeable without opening the media circuit.
• Replacement diaphragms as a seal kit for G 1-1/4 in NBR, FKM and EPDM, also for converting to a different medium.