3/2-way solenoid valve, normally closed, M5, 28 l/min, 24 V DC, LED connector - YPC YSV211

The YSV211 drives small cylinders, grippers and pilot circuits directly through M5 ports. Being direct acting, it needs no minimum pressure and switches 28 l/min anywhere from 0 to 7 bar. With the coil de-energised, port A is exhausted, so the actuator goes pressureless if power fails. The 24 V DC coil connects straight to a PLC output, so no interposing relay is needed.

Advantages

• Cassette design, seal and screw for stacking are included, plus a blanking screw for single use
• Direct acting from 0 bar, switches reliably at low pressure up to 7 bar
• Aluminium body with NBR seals and a glass fibre reinforced polyamide pilot
• Oil-free operation, filtered air, lubricated or not
• LED in the connector shows the switching state, the 600 mm cable comes pre-wired, the suppressor circuit damps switch-off spikes

Applications

• driven directly from 24 V DC PLC output cards
• small single-acting cylinders and grippers with M5 ports
• pilot valve for air-operated process or directional valves
• stacked valve blocks without a separate manifold

Accessories and spare parts

A replacement solenoid coil, type L, for 24 V DC is available separately should a coil ever need replacing.