3/2-way solenoid valve, normally closed, M5, 28 l/min, 115 V AC, plug connector - YPC YSV211

A direct acting 3/2-way valve needs no minimum pressure: the YSV211 switches from 0 to 7 bar at 28 l/min. With the coil de-energised, port A is exhausted, so the actuator goes pressureless if power fails. The cassette design lets several valves be stacked into one block. The 115 V AC coil fits machines with a 115 V control circuit, as built for North American sites.

Advantages

• Oil-free operation, filtered air, lubricated or not
• Non-locking manual override for testing without power
• Cassette design, seal and screw for stacking are included, plus a blanking screw for single use
• Direct acting from 0 bar, switches reliably at low pressure up to 7 bar
• Aluminium body with NBR seals and a glass fibre reinforced polyamide pilot

Applications

• machines wired for a 115 V control voltage
• small single-acting cylinders and grippers with M5 ports
• pilot valve for air-operated process or directional valves
• stacked valve blocks without a separate manifold

Accessories and spare parts

A replacement solenoid coil, type L, for 115 V AC is available separately should a coil ever need replacing.