Manifold base for 3/2-way valves, 6 stations, G 3/8, for RV30 valves - E.MC

This manifold base from the E.MC V/RV Series Manifold combines 6 RV30 3/2-way valves into one valve group. All stations share one supply channel with G 3/8 ports and exhaust is collected through 2x G 3/8.

Advantages

• Aluminium body with NBR seals, screws and seals for mounting the valves are included.
• Common G 3/8 supply channel: one channel serves all 6 stations, no separate feed line or tee per valve.
• Collective exhaust through 2x G 3/8: fit 2 silencers or pipe the exhaust away from all valves at once.
• 28 mm pitch to the E.MC datasheet: valves sit side by side and the valve bank stays narrow.

Applications

• Single-acting cylinders and grippers pressurised and exhausted by 3/2-way valves
• Blow-off air and nozzles at several points of a fixture
• Pilot signals for larger pneumatically operated valves

Accessories and spare parts

Unused stations are closed with a matching blanking plate, supplied with seal and fixing screws for the 28 mm pitch. That way the base can be sized generously and filled later. Replacement seals with screws are available as a set for valve changes.