Manifold base for 3/2-way valves, 6 stations, G 1/8, for RV10 valves - E.MC

This manifold base from the E.MC V/RV Series Manifold combines 6 RV10 3/2-way valves into one valve group. All stations share one supply channel with G 1/8 ports and exhaust is collected through 2x G 1/8.

Advantages

• Collective exhaust through 2x G 1/8: fit 2 silencers or pipe the exhaust away from all valves at once.
• 19 mm pitch to the E.MC datasheet: valves sit side by side and the valve bank stays narrow.
• Aluminium body with NBR seals, screws and seals for mounting the valves are included.
• Common G 1/8 supply channel: one channel serves all 6 stations, no separate feed line or tee per valve.

Applications

• Single-acting cylinders and grippers pressurised and exhausted by 3/2-way valves
• Blow-off air and nozzles at several points of a fixture
• Pilot signals for larger pneumatically operated valves

Accessories and spare parts

Unused stations are closed with a matching blanking plate, supplied with seal and fixing screws for the 19 mm pitch. That way the base can be sized generously and filled later. Replacement seals with screws are available as a set for valve changes.