Manifold base for 3/2-way valves, 2 stations, G 1/8, for RV10 valves - E.MC

Even with 2 valves, a shared base saves fittings and tubing runs. This manifold base from the E.MC V/RV Series Manifold carries 2 RV10 3/2-way valves at a 19 mm pitch and feeds them from a common G 1/8 supply channel.

Advantages

• Collective exhaust through 2x G 1/8: fit 2 silencers or pipe the exhaust away from all valves at once.
• 19 mm pitch to the E.MC datasheet: valves sit side by side and the valve bank stays narrow.
• Aluminium body with NBR seals, screws and seals for mounting the valves are included.
• Common G 1/8 supply channel: one channel serves both stations, no separate feed line or tee per valve.

Applications

• Compact fixtures with 2 pneumatic functions where installation space is tight
• Single-acting cylinders and grippers pressurised and exhausted by 3/2-way valves
• Blow-off air and nozzles at several points of a fixture
• Pilot signals for larger pneumatically operated valves

Accessories and spare parts

Unused stations are closed with a matching blanking plate, supplied with seal and fixing screws for the 19 mm pitch. That way the base can be sized generously and filled later. Replacement seals with screws are available as a set for valve changes.