Rotary clamp cylinder SQK series, right swivel, 25 mm bore, 20 mm clamping stroke, with arm - E.MC

A 25 mm bore gives this SQK series rotary clamp cylinder more holding force with the same M5 port as the smaller sizes. The arm turns 90° onto the workpiece before clamping. This version swings clockwise when clamping. A 20 mm clamping stroke compensates height differences between different parts.

Advantages

• Magnetic piston as standard for end position sensing with cylinder switches
• 90° ± 2° swivel over 9.5 mm of travel, followed by 20 mm clamping stroke
• Steel clamp arm included, removable and adjustable in 90° steps
• Rotation accuracy ±1.2° in the clamping section, effective clamping bore 21.9 mm

Applications

• Manually loaded fixtures with free access from above
• Clamping workpieces in welding and assembly fixtures
• Holding down sheet metal and castings during machining

Mount vertically, standing or hanging, never horizontally. The cylinder takes no side loads and clamps only within the clamping stroke on flat surfaces, with the workpiece at rest. Limit the piston speed with a one-way flow control valve.

Accessories and spare parts

• Repair kit for the 25 mm bore, fits both swivel directions