Rotary clamp cylinder SQK series, right swivel, 20 mm bore, 30 mm clamping stroke, with arm - E.MC

With a 20 mm bore and M5 port, this SQK series rotary clamp cylinder suits small to medium workpieces. On release the clamp arm swings 90° out of the loading area. This version swings clockwise when clamping. A 30 mm clamping stroke leaves room for taller workpieces and stand-off clamp pads.

Advantages

• 90° ± 2° swivel over 9.5 mm of travel, followed by 30 mm clamping stroke
• Operating pressure 1.5 to 10 bar, rubber cushioning, NBR seals
• Steel clamp arm included, removable and adjustable in 90° steps
• Magnetic piston as standard for end position sensing with cylinder switches

Applications

• Test fixtures where the arm must not obstruct loading
• Clamping points on workpiece carriers and indexing tables
• Manually loaded fixtures with free access from above

Mount vertically, standing or hanging, never horizontally. The cylinder takes no side loads and clamps only within the clamping stroke on flat surfaces, with the workpiece at rest. Limit the piston speed with a one-way flow control valve.

Accessories and spare parts

• Repair kit for the 20 mm bore, fits both swivel directions