Rotary clamp cylinder SQK series, left swivel, 32 mm bore, 30 mm clamping stroke, with arm - E.MC

From the 32 mm bore upward, the SQK series is supplied through G 1/8 and reaches a rotation accuracy of ±0.9° in the clamping section. The arm swings through 90° over 15 mm before the actual clamping stroke begins. This version swings anticlockwise when clamping. A 30 mm clamping stroke leaves room for taller workpieces and stand-off clamp pads.

Advantages

• Steel clamp arm included, removable and adjustable in 90° steps
• Rotation accuracy ±0.9° in the clamping section, effective clamping bore 27.7 mm
• 90° ± 2° swivel over 15 mm of travel, followed by 30 mm clamping stroke
• Operating pressure 1.5 to 10 bar, rubber cushioning, NBR seals

Applications

• Holding down sheet metal and castings during machining
• Test fixtures where the arm must not obstruct loading
• Clamping points on workpiece carriers and indexing tables

Mount vertically, standing or hanging, never horizontally. The cylinder takes no side loads and clamps only within the clamping stroke on flat surfaces, with the workpiece at rest. Limit the piston speed with a one-way flow control valve.

Accessories and spare parts

• Repair kit for the 32 mm bore, fits both swivel directions