Rotary clamp cylinder SQK series, left swivel, 25 mm bore, 30 mm clamping stroke, with arm - E.MC

A 25 mm bore gives this SQK series rotary clamp cylinder more holding force with the same M5 port as the smaller sizes. The arm turns 90° onto the workpiece before clamping. This version swings anticlockwise when clamping. A 30 mm clamping stroke leaves room for taller workpieces and stand-off clamp pads.

Advantages

• Steel clamp arm included, removable and adjustable in 90° steps
• 90° ± 2° swivel over 9.5 mm of travel, followed by 30 mm clamping stroke
• Operating pressure 1.5 to 10 bar, rubber cushioning, NBR seals
• Rotation accuracy ±1.2° in the clamping section, effective clamping bore 21.9 mm

Applications

• Clamping points on workpiece carriers and indexing tables
• Manually loaded fixtures with free access from above
• Clamping workpieces in welding and assembly fixtures

Mount vertically, standing or hanging, never horizontally. The cylinder takes no side loads and clamps only within the clamping stroke on flat surfaces, with the workpiece at rest. Limit the piston speed with a one-way flow control valve.

Accessories and spare parts

• Repair kit for the 25 mm bore, fits both swivel directions