Rotary clamp cylinder SQK series, left swivel, 25 mm bore, 10 mm clamping stroke, with arm - E.MC

A 25 mm bore gives this SQK series rotary clamp cylinder more holding force with the same M5 port as the smaller sizes. The arm turns 90° onto the workpiece before clamping. This version swings anticlockwise when clamping. The 10 mm clamping stroke keeps the height low, ideal for workpieces with a constant clamping height.

Advantages

• Magnetic piston as standard for end position sensing with cylinder switches
• 90° ± 2° swivel over 9.5 mm of travel, followed by 10 mm clamping stroke
• Steel clamp arm included, removable and adjustable in 90° steps
• Rotation accuracy ±1.2° in the clamping section, effective clamping bore 21.9 mm

Applications

• Holding down sheet metal and castings during machining
• Test fixtures where the arm must not obstruct loading
• Clamping points on workpiece carriers and indexing tables

Mount vertically, standing or hanging, never horizontally. The cylinder takes no side loads and clamps only within the clamping stroke on flat surfaces, with the workpiece at rest. Limit the piston speed with a one-way flow control valve.

Accessories and spare parts

• Repair kit for the 25 mm bore, fits both swivel directions