Rotary clamp cylinder SQK series, left swivel, 16 mm bore, 30 mm clamping stroke, with arm - E.MC

The smallest rotary clamp cylinder in the SQK series clamps light parts in compact fixtures. As it extends, the arm swings 90° aside and clears the nest, as it retracts it turns back and clamps. This version swings anticlockwise when clamping. A 30 mm clamping stroke leaves room for taller workpieces and stand-off clamp pads.

Advantages

• Steel clamp arm included, removable and adjustable in 90° steps
• 90° ± 2° swivel over 7.5 mm of travel, followed by 30 mm clamping stroke
• Operating pressure 1.5 to 10 bar, rubber cushioning, NBR seals
• Rotation accuracy ±1.2° in the clamping section, effective clamping bore 13.9 mm

Applications

• Test fixtures where the arm must not obstruct loading
• Clamping points on workpiece carriers and indexing tables
• Manually loaded fixtures with free access from above

Mount vertically, standing or hanging, never horizontally. The cylinder takes no side loads and clamps only within the clamping stroke on flat surfaces, with the workpiece at rest. Limit the piston speed with a one-way flow control valve.

Accessories and spare parts

• Repair kit for the 16 mm bore, fits both swivel directions