2/2-way solenoid valve, stainless steel, G 2, DN 50, normally closed, FKM seal, 24 V AC - E.MC

Main lines with G 2 ports need a valve that switches large flows with a small coil. The diaphragm pilot of this stainless steel valve uses the line pressure: DN 50, Kv value 684 l/min, coil rating 22 VA. It works from 0.5 bar differential up to 16 bar.

Advantages

• Diaphragm piloted: DN 50 and Kv value 684 l/min (Cv 48) at 0.5 to 16 bar
• Also suitable for light oil up to 20 cSt, then rated up to 13 bar
• Supplied complete with solenoid coil and connector, install with the coil upright
• 24 V AC coil for 50/60 Hz, power consumption 22 VA, IP 65 protection
• 316 stainless steel body, stainless internals, FKM seal from -20 to +120 °C

Applications

• G 2 main lines for water and neutral media
• Filling of tanks and basins at high flow rates
• Compressed air distribution where the body must resist corrosion

Accessories and spare parts

Wear parts are available separately:

• Replacement solenoid coil type P for 24 V AC
• Replacement diaphragms in NBR, FKM and EPDM for G 2