2/2-way solenoid valve, brass, G 2, DN 50, normally closed, NBR seal, 24 V AC - E.MC

Large flows, small coil: this G 2 2/2-way valve uses line pressure to lift the main diaphragm and switches DN 50 with 22 VA. It is closed when de-energised, operating pressure 0.5 to 16 bar. The standard NBR seal handles air, water and light oil up to +80 °C.

Advantages

• Diaphragm piloted: DN 50 and Kv value 684 l/min (Cv 48) at 0.5 to 16 bar
• Also suitable for light oil up to 20 cSt, then rated up to 13 bar
• Supplied complete with solenoid coil and connector, install with the coil upright
• 24 V AC coil for 50/60 Hz, power consumption 22 VA, IP 65 protection
• Brass body, brass and stainless internals, NBR seal from -10 to +80 °C

Applications

• Shut-off of compressed air main lines ahead of machine groups
• Water supply in cooling and irrigation circuits
• Light oil and lubricant lines up to 13 bar

Accessories and spare parts

Wear parts are available separately:

• Replacement solenoid coil type P for 24 V AC
• Replacement diaphragms in NBR, FKM and EPDM for G 2