2/2-way solenoid valve, brass, G 1-1/2, DN 40, normally closed, EPDM seal, 24 V AC - E.MC

Large flows, small coil: this G 1-1/2 2/2-way valve uses line pressure to lift the main diaphragm and switches DN 40 with 22 VA. It is closed when de-energised, operating pressure 0.5 to 16 bar. The EPDM seal is rated for hot water and air up to +130 °C, not for oil.

Advantages

• Diaphragm piloted: DN 40 and Kv value 427 l/min (Cv 30) at 0.5 to 16 bar
• EPDM for hot water up to +130 °C, the diaphragm is available separately as a spare
• Supplied complete with solenoid coil and connector, install with the coil upright
• 24 V AC coil for 50/60 Hz, power consumption 22 VA, IP 65 protection
• Brass body, brass and stainless internals, EPDM seal from -10 to +130 °C

Applications

• Hot water in cleaning and rinsing systems up to +130 °C
• Warm water circuits in temperature control and washing systems
• Compressed air and water where the medium carries no oil

Accessories and spare parts

Wear parts are available separately:

• Replacement solenoid coil type P for 24 V AC
• Replacement diaphragms in NBR, FKM and EPDM, shared by G 1-1/4 and G 1-1/2