E.MC
Repair kit for parallel grippers with ball guide, 10 mm bore, all operating modes - E.MC
Item FL-SHZ-10-REP
€15.12
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Parallel gripper with ball guide, single-acting, normally closed, internal gripping, 10 mm bore - E.MC
Single-acting parallel gripper that is closed without air and opens under pressure to grip inside bores. 10 mm bore, 13 N per finger. No lubrication.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Closed in its home position, this version enters a bore or sleeve with its fingers together. Compressed air spreads the fingers, each pressing against the inner wall with 13 N at 0.5 MPa. Only one port needs to be switched.
Advantages
- 13 N gripping force per finger, opening, at 0.5 MPa
- Permissible vertical load 58 N on the fingers
- Up to 180 cycles per minute, no lubrication required
- Magnetic piston as standard, mounting at the rear, front with thread or through hole, and at the side
Applications
- Internal gripping in bores, sleeves and rings
- Handling bearing rings and bushes that must not be gripped on the outside
- Stations with one free valve position per gripper
Accessories and spare parts
The repair kit for the parallel gripper with 10 mm bore is available separately and fits the double-acting as well as both single-acting versions of this size.
Technical data
| Type | parallel gripper with ball guide |
|---|---|
| Operation | single-acting, normally closed (internal gripping), with magnetic piston |
| Bore | 10 mm |
| Jaw travel | 3.4 mm |
| Gripping force per finger, opening | 13 N |
| Gripping force reference | 0.5 MPa, gripping point distance 20 mm |
| Permissible vertical load | 58 N |
| Air port | M3x0.5 |
| Operating pressure | 3 to 7 bar (0.3 to 0.7 MPa) |
| Medium | clean compressed air, filtered to 40 µm, no lubrication needed |
| Temperature | -20 to 70 °C, no freezing |
| Max. operating frequency | 180 cycles per minute |
| Repeatability | ±0.01 mm |
| Cylinder | aluminium |
| Rear cover | aluminium alloy |
| Piston and piston rod | stainless steel |
| Fingers and ball guide | hardened stainless steel |
| Seals | NBR, front dust seal TPU/NBR |
| Weight | 65 g |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | SHZ 10 FS |
| EAN | 4050571871635 |
| Zolltarifnummer | 84123100 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | einfachwirkend - drucklos geschlossen (innen greifend) |
| Piston Ø [mm] | 10 |
| Bore (mm) | 10 |
| Temperaturbereich | -20-70 °C |
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.