Parallel gripper with ball guide, single-acting, normally open, external gripping, 10 mm bore - E.MC

This single-acting version is open in its home position. Compressed air closes the fingers and grips the part from the outside with 7 N per finger at 0.5 MPa. Only one port is switched, the gripper returns to its home position by itself.

Advantages

• Ball guide, fingers and guide in hardened stainless steel, repeatability ±0.01 mm
• 7 N gripping force per finger, closing, at 0.5 MPa
• Permissible vertical load 58 N on the fingers
• Up to 180 cycles per minute, no lubrication required

Applications

• External gripping of small turned and stamped parts
• Stations where the gripper should be open and clear of the part without a signal
• Systems with few free valve positions, one port per gripper

Accessories and spare parts

The repair kit for the parallel gripper with 10 mm bore is available separately and fits the double-acting as well as both single-acting versions of this size.