Compact guide cylinder with plain bearings, double-acting, 63 mm bore, 25 mm stroke, magnetic piston - E.MC

Built for heavy lifting and pushing units, this guide cylinder combines a 63 mm bore with a 25 mm stroke. Two guide rods in plain bearings take up to 296 N lateral load and 14.7 Nm torque at the end plate. The short stroke keeps the installed height low, for example for stoppers and clamps.

Advantages

• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide
• Permissible lateral load 296 N and 14.7 Nm torque at the end plate at 25 mm stroke
• Rubber bumpers in both end positions, piston speed 30 to 500 mm/s
• Air port G 1/4 at the side or from below, the unused one is closed with a plug

Applications

• Pushing and transferring components between conveyors
• Clamping and pressing units with high lateral loads
• Lifting heavy fixtures and workpiece carriers

Accessories and spare parts

A repair kit for guide cylinders with a 63 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.