Compact guide cylinder with plain bearings, double-acting, 63 mm bore, 175 mm stroke, magnetic piston - E.MC

Built for heavy lifting and pushing units, this guide cylinder combines a 63 mm bore with a 175 mm stroke. Two guide rods in plain bearings take up to 179 N lateral load and 8.86 Nm torque at the end plate. With a long stroke the permissible lateral load drops, and the table gives the value for exactly this stroke length.

Advantages

• Non-rotating accuracy ±0.06° when retracted, provided by two steel guide rods
• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide
• Permissible lateral load 179 N and 8.86 Nm torque at the end plate at 175 mm stroke
• Mounting from the top, from below, at the rear or via the T-slot underneath

Applications

• Pushing and transferring components between conveyors
• Clamping and pressing units with high lateral loads
• Lifting heavy fixtures and workpiece carriers

Accessories and spare parts

A repair kit for guide cylinders with a 63 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.