E.MC
Repair kit for compact guide cylinders with plain bearings, 40 mm bore - E.MC
Item FL-438664
€13.24
Images are examples, some edited with AI. The technical data are authoritative. AI notice
Compact guide cylinder with plain bearings, double-acting, 40 mm bore, 175 mm stroke, magnetic piston - E.MC
Compact guide cylinder with a 40 mm bore and 175 mm stroke for lifting and pushing under side load. Two guide rods in plain bearings take up to 116 N and hold the end plate within ±0.08°.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
This 40 mm bore guide cylinder moves fixtures and workpiece carriers over a 175 mm stroke and takes lateral loads of up to 116 N through its guide rods. The end plate stays within ±0.08° of rotation. With a long stroke the permissible lateral load drops, and the table gives the value for exactly this stroke length.
Advantages
- Permissible lateral load 116 N and 3.98 Nm torque at the end plate at 175 mm stroke
- Mounting from the top, from below, at the rear or via the T-slot underneath
- Piston rod in S45C carbon steel, hard chrome plated, NBR piston seal, TPU rod seal
- Magnetic piston for end position sensing with cylinder switches
Applications
- Stoppers for workpiece carriers on twin-belt conveyors
- Moving test fixtures with off-centre loads
- Lifting and pushing units on assembly lines
Accessories and spare parts
A repair kit for guide cylinders with a 40 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.
Technical data
| Property | Value |
|---|---|
| Design | Compact guide cylinder with two guide rods, double-acting |
| Series | E.MC SG, SGM version with plain bearings |
| Bore | 40 mm |
| Stroke | 175 mm |
| Air port | G 1/8, side or bottom |
| Permissible lateral load | 116 N |
| Permissible torque at end plate | 3.98 Nm |
| Non-rotating accuracy (retracted) | ±0.08° |
| Medium | Compressed air, filtered to 40 µm |
| Operating pressure | 1.5 to 10 bar |
| Proof pressure | 15 bar |
| Operating temperature | -20 to 70 °C, non-freezing |
| Piston speed | 30 to 500 mm/s |
| Cushioning | Rubber bumpers |
| Stroke tolerance | +1.0 / 0 mm |
| Magnetic piston | yes, for cylinder switches |
| Guide | Brass plain bearings, self-lubricating bronze powder bearing |
| Materials | Barrel, end covers, piston and fixing plate aluminium alloy, guide rods steel, piston rod S45C hard chrome plated, screws stainless steel |
| Seals | Piston seal NBR, rod seal TPU, O-ring NBR, end bumpers NBR/TPU |
| Mounting | Top, bottom, rear, T-slot underneath |
| Weight | 4.6 kg |
| Dimension drawing | in the E.MC datasheet (PDF) |
| Manufacturer | E.MC |
| Hersteller-Nr | SGM 40/175 |
| EAN | 4050571873813 |
| Zolltarifnummer | 84123100 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | mit Gleitlager |
| Thread | G 1/8 |
| Piston Ø [mm] | 40 |
| Stroke [mm] | 175 |
| Bore (mm) | 40 |
| Temperaturbereich | -20-70 °C |
Accessories
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.