Compact guide cylinder with plain bearings, double-acting, 40 mm bore, 100 mm stroke, magnetic piston - E.MC

This 40 mm bore guide cylinder moves fixtures and workpiece carriers over a 100 mm stroke and takes lateral loads of up to 159 N through its guide rods. The end plate stays within ±0.08° of rotation. Port G 1/8, operating pressure 1.5 to 10 bar.

Advantages

• Permissible lateral load 159 N and 5.48 Nm torque at the end plate at 100 mm stroke
• Magnetic piston for end position sensing with cylinder switches
• Non-rotating accuracy ±0.08° when retracted, provided by two steel guide rods
• Mounting from the top, from below, at the rear or via the T-slot underneath
• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide

Applications

• Lifting and pushing units on assembly lines
• Stoppers for workpiece carriers on twin-belt conveyors
• Moving test fixtures with off-centre loads

Accessories and spare parts

A repair kit for guide cylinders with a 40 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.