Compact guide cylinder with plain bearings, double-acting, 32 mm bore, 175 mm stroke, magnetic piston - E.MC

This 32 mm bore guide cylinder moves fixtures and workpiece carriers over a 175 mm stroke and takes lateral loads of up to 116 N through its guide rods. The end plate stays within ±0.08° of rotation. With a long stroke the permissible lateral load drops, and the table gives the value for exactly this stroke length.

Advantages

• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide
• Permissible lateral load 116 N and 3.61 Nm torque at the end plate at 175 mm stroke
• Rubber bumpers in both end positions, piston speed 30 to 500 mm/s
• Air port G 1/8 at the side or from below, the unused one is closed with a plug

Applications

• Lifting and pushing units on assembly lines
• Stoppers for workpiece carriers on twin-belt conveyors
• Moving test fixtures with off-centre loads

Accessories and spare parts

A repair kit for guide cylinders with a 32 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.