Compact guide cylinder with plain bearings, double-acting, 32 mm bore, 125 mm stroke, magnetic piston - E.MC

This 32 mm bore guide cylinder moves fixtures and workpiece carriers over a 125 mm stroke and takes lateral loads of up to 142 N through its guide rods. The end plate stays within ±0.08° of rotation. With a long stroke the permissible lateral load drops, and the table gives the value for exactly this stroke length.

Advantages

• Non-rotating accuracy ±0.08° when retracted, provided by two steel guide rods
• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide
• Permissible lateral load 142 N and 4.42 Nm torque at the end plate at 125 mm stroke
• Mounting from the top, from below, at the rear or via the T-slot underneath

Applications

• Lifting and pushing units on assembly lines
• Stoppers for workpiece carriers on twin-belt conveyors
• Moving test fixtures with off-centre loads

Accessories and spare parts

A repair kit for guide cylinders with a 32 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.