Compact guide cylinder with plain bearings, double-acting, 25 mm bore, 150 mm stroke, magnetic piston - E.MC

With a 25 mm bore and 150 mm stroke, this guide cylinder handles lifting and pushing tasks where the load acts on the side of the end plate. The guide rods run in self-lubricating plain bearings and the end plate accepts up to 79 N of lateral load. With a long stroke the permissible lateral load drops, and the table gives the value for exactly this stroke length.

Advantages

• Permissible lateral load 79 N and 2.02 Nm torque at the end plate at 150 mm stroke
• Magnetic piston for end position sensing with cylinder switches
• Non-rotating accuracy ±0.09° when retracted, provided by two steel guide rods
• Mounting from the top, from below, at the rear or via the T-slot underneath
• Brass plain bearings with a self-lubricating bronze powder bearing, no relubrication of the guide

Applications

• Positioning and indexing moves with side-acting loads
• Pressing and clamping small assemblies
• Raising and lowering workpiece carriers at assembly stations

Accessories and spare parts

A repair kit for guide cylinders with a 25 mm bore is available separately. For end position sensing via the magnetic piston, E.MC offers matching cylinder switches.